MODEL 6613B CAPACITY: 2 TON FLOOR SERVICE JACK OWNER'S MANUAL CONTENTS: Page 1 2 3 4-5 6 Specifications Warning Information Setup, Operating and Preventative Maintenance Troubleshooting, Warranty Information and Maintenance Exploded View Drawing and Replacement Parts SPECIFICATIONS Capacity ............................................................................2 Tons Low Height...........................................................................2.83" High Height...............................
Warning Information This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
MODEL 6613B CAPACITY: 2 TON FLOOR SERVICE JACK OWNER'S MANUAL SETUP PLEASE REFER TO THE EXPLODED VIEW DRAWING IN THIS MANUAL IN ORDER TO IDENTIFY PARTS. 1. Insert the #41 upper handle in the #39 lower handle aligning the cross holes so the handle halves can be secured together using the #40 bolt. Do not overtighten or you will strip the threads. 2. Remove the reference number (38) handle bolt from the reference number (35) handle socket.
MODEL 6613B CAPACITY: 2 TON FLOOR SERVICE JACK OWNER'S MANUAL 5. 6. Inspect the jack before each use. Do not use the jack if any component is cracked, broken, bent, shows sign of damage or leaks hydraulic fluid. Do not use the jack if it has loose or missing hardware or components, or is modified in any way. Take corrective action before using the jack again. Any hydraulic repairs within the warranty period must be performed by an authorized service center.
MODEL 6613B CAPACITY: 2 TON FLOOR SERVICE JACK LIMITED WARRANTY SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY’S SUNEX TOOLS® BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. Sunex International, Inc. will repair or replace its Sunex Tools® branded products which fail to give satisfactory service due to defective workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific product.
MODEL 6613B CAPACITY: 2 TON FLOOR SERVICE JACK Index# Part# 1 2 3 RS6613B03 4 5 RS6613B05 41 6 7 8 9 10 RS3511 11 12 13 14 15 16 17 18 19 20 21 22 23 24 43 25 26 27 RS6613B27 28 RS6613B28 29 30 31 RS6613B31 32 33 RS6613B33 34 35 RS6613B35 36 37 38 RS3526 39 RS6613B39 40 RS3534 41 RS3536 42 RS6613B42 43 RS3544SUN 44 RS6613B44 45 RS6613BLK Parts list and drawing 40 Only items identified by part number are available for purchase.
MODELO 6613 B CAPACIDAD: 2 TONELADAS GATO DE SERVICIO PARA PISO Manual de operatión CONTENIDO: Página 7 8 9 10 Especificaciones Información de advertencia Ensamble, operación y mantenimiento Diagnóstico de averías e información de garantía ESPECIFICACIONES Capacidad .............................................................. 2 Toneladas Altura mínima.......................................................................2.83" Altura máxima...............................................................
Información de advertencia Este símbolo indica una alerta de seguridad y se usa para advertir sobre peligro de accidentes personales. Observe toda la información de seguridad que sigue a este símbolo para evitar la posibilidad de que ocurran lesiones o muerte. ADVERTENCIA ADVERTENCIA: Indica una situación peligrosa que si no se evita, puede provocar la muerte o lesiones graves. IMPORTANTE: LEA ESTAS INSTRUCCIONES ANTES DE USAR EL DISPOSITIVO ANTES DE USAR ESTE DISPOSITIVO, LEA ESTE MANUAL DETENIDAMENTE.
MODELO 6613 B CAPACIDAD: 2 TONELADAS GATO DE SERVICIO PARA PISO Manual de operatión MONTAJE CONSULTE POR FAVOR EL DIBUJO DE VISTA EN DETALLE EN ESTE MANUAL PARA IDENTIFICAR LAS PARTES. 1. Inserte el mango superior #41 en el mango inferior #39, alineando los agujeros de cruce con el fin de que las mitades de los mangos se puedan sujetar juntas usando el perno #40. No los sobre apriete o se estropearán las roscas. 2.
Manual de operatión 5. 6. Verifique el gato antes de usarlo. No use el gato si alguna de sus partes está quebrada, rota, torcida o dañada, ni cuando el sistema hidráulico tenga fugas. No use el gato si presenta alteraciones o es inestable debido a piezas metálicas o partes desajustadas o faltantes. Tome las medidas de corrección apropiadas antes de usar el gato otra vez. No repare el sistema hidráulico a menos que sea un técnico calificado que conozca el funcionamiento de este dispositivo.
MODELE 6613 B CAPACITÉ DE 2 TONNES CRIC DE SERVICE DE PLANCHER Manuel d'operatión CONTENU: Page 11 12 13-14 15 Spécifications Information d'avertissement Installation, opération et entretien préventif Dépannage, information de garantie et entretien SPÉCIFICATIONS Capacité ........................................................................2 Tonnes Hauteur minimum............................................................ 2,83 po Hauteur maximum.......................................................
AVERTISSEMENTS Ce symbole indique un danger potentiel. Il est utilisé pour avertir l'utilisateur des risques potentiels de blessures corporelles. Prière de respecter toutes les consignes de sécurité qui suivent ce symbole afin d'éviter les blessures ou la mort potentielles. AVERTISSEMENT AVERTISSEMENT : Ce symbole indique une situation dangereuse qui pourrait causer la mort ou des blessures graves si elle n'est pas évitée. IMPORTANT : LIRE CES CONSIGNES AVANT L'UTILISATION.
MODELE 6613 B CAPACITÉ DE 2 TONNES CRIC DE SERVICE DE PLANCHER MANUEL DU PROPRIÉTAIRE INSTALLATION VEUILLEZ CONSULTER LA VUE ÉCLATÉE POUR IDENTIFIER LES PIÈCES. 1. Insérez la poignée supérieure no 41 dans la poignée inférieure no 39 en alignant les trous afin que les moitiés de poignée puissent être fixées ensemble à l’aide du boulon no 40. Ne pas trop serrer ou vous allez endommager les filets. 2. Enlevez la vis de pression de la poignée (no de réf. : 38) de la fourche de la poignée (no de réf. : 35).
alors que le cric est toujours sous garantie, rapporter le cric dans n'importe quel magasin pour une réparation ou un remplacement sous garantie. IMPORTANT: Afin de ne pas endommager les joints d'étanchéité et entraîner le bris du cric, ne jamais utiliser d'alcool, de liquide pour freins ou d'huile pour transmission dans le cric. Utiliser l’huile de chevron hydraulique AW ISO 32 ou son équivalent Unocal Unax AW 150. 4.
MODELE MODELE 6613 B CAPACITÉ DE 3-1/2 TONNES CRIC DE SERVICE DE PLANCHER GARANTIE LIMITÉE SUNEX INTERNATIONAL, INC. GARANTIT À SES CLIENTS QUE LES OUTILS DE MARQUE SUNEX TOOLS SONT EXEMPTS DE DÉFAUTS DE MAIN D'ŒUVRE ET DE MATÉRIAU Sunex International, Inc.