Manual

11 of 12
Grozone SCC1 Advanced User Guide – March 2012 www.grozonecontrol.com
CHANGING THE OUTPUT CONTROL PARAMETER
 Turn the SELECT knob (Day Temperature) to position 2. The two top PARAMETER indicators will lit.
 CLICK the Pushbutton to select the VALUE Indicator (A to F) you need to turn ON (Lit) or OFF.
 Rotate the SET/RESET knob (Humidity Temperature) to turn ON/OFF the selected indicator (selected
indicator is flashing; flashing will stop once value has been set or reset).
 To EXIT and SAVE, make sure to move through all 6 indicators. Successful saving will blink the VALUE
indicators 4 times.
Indicator Name
Effect on Settings
(Factory Setting in Bold)
Indicator Name
Effect on Settings
(Indicator OFF is Factory Setting)
COOL
Control Range
Indicator is Off : +/- 2°F around setpoint
Indicator is Lit : +/- 4°F around setpoint
HEAT
Control Range
Indicator is Off :
Fixed range, -8°F to -2°F below setpoint
Indicator is Lit:
Auto range, -8°F to -2°F OR -12°F to -6°F below
setpoint to avoid competing equipment to operate
simultaneously
HUMIDITY
Control Range
Indicator is Off : +/- 2% around setpoint
Indicator is Lit : +/- 4% around setpoint
CO2
Control Range
Indicator is Off : +0 / - 200 ppm below setpoint
Indicator is Lit : +0 / - 400 ppm below setpoint
Low Temp
Limit
Indicator is Off : -6°F below setpoint
Indicator is Lit : -10°F below setpoint
High Temp
Limit
Indicator is Off : +10°F above setpoint
Indicator is Lit : 90°F regardless of setpoint
Ex. COOL, HUMIDITY and CO2 Control Ranges have been set to alternate settings.