Use and Care Manual

10
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY
(877-907-8669).
STEP 5:
Remove 2 Hex Socket Pan Head Screws
(No. 45), 2 Spring Washers (No 41) and 2
Flat Washers (No. 33) from the Main
Frame (No. 1) using Allen Wrench (No.
94).
Connect the Sensor Wire (No. 36) and
Extension Wire (No. 37).
Attach the Meter Frame Tube (No. 2) to the
Main Frame (No. 1) with 2 Hex Socket Pan
Head Screws (No. 45), 2 Spring Washers
(No 41) and 2 Flat Washers (No. 33) that
were just removed. Tighten and secure with
Allen Wrench (No. 94).
Connect the Extension Wire (No. 37) with
wire of Meter (No. 13).
Remove 4 Cross Head Screws (No. 49)
from the Meter (No. 13) using Spanner (No.
93).
Attach the Meter (No. 13) to the Meter
Frame Tube (No. 2) with 4 Cross Head
Screws (No. 49) that were just removed.
Tighten and secure with Spanner (No. 93).
NOTE: Make sure you do not cut or pinch
any wires inside the tube.