Use and Care Manual

14
OPERATING INSTRUCTIONS
FUNCTION BUTTONS
MODE:
1. Press the button to select TIME, DISTANCE and CAL to preset.
2. Press the button to select any function display values on LCD or enter any values to preset.
3. Press and hold the button for 2 seconds to reset all the values to 0 except the Odometer. (When
the user replaces batteries, all the values will reset to ZERO automatically.)
SET:
To set up the target value of TIME, DISTANCE and CAL. Press and hold the button for 2 seconds
to speed up the increment.
RESET:
1. Press and hold the button for 2 seconds to reset the function values except the Odometer,
which can only be reset after replacing the batteries.
2. Press this button when setting the wrong target values for time, distance or calories, the values
will be reset.
FUNCTIONS & OPERATIONS
1. AUTO ON/OFF:
Once the user begins to do exercise, the computer will show the workout value automatically. After
about 4 minutes of inactivity, the computer will turn off. Odometer value does not reset to 0 when
the computer turns off. When user starts exercise again, workout value of odometer will
accumulate continuously.
2. AUTO SCAN:
After the computer is power on or press Mode key, the LCD will display all functions from
TIME-SPEED-DISTANCE-CALORIES-ODOMETER. Each value will be held for 4 seconds.