Use and Care Manual

7
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY
(877-907-8669).
STEP 2:
Remove 2 Hex Socket Pan Head
Screws (No. 42), 2 Spring Washers
(No. 46), 2 Flat Washers (No. 40), 2 D
Shape Washers (No. 47), and 2 Wave
Washers (No. 50) from the Long Axle
(No. 38) using Allen Wrench (No. 94).
Insert the Long Axle (No. 38) to the Main
Frame (No. 1), then attach the Swing
Tubes (No. 5) to both sides of Main
Frame (No. 1) with 2 Hex Socket Pan
Head Screws (No. 42), 2 Spring
Washers (No. 46), 2 Flat Washers (No.
40), 2 D Shape Washers (No. 47), and 2
Wave Washers (No. 50) that were just
removed. Tighten and secure with the
Allen Wrench (No. 94). Do not fully
tighten the screws at this time.
Attach the Connecting Boards (No.
7L/R) to the Swing Tubes (No. 5) with 2
Hex Bolts (No. 32), 4 Flat Washers (No.
33) and 2 Nylon Nuts (No. 34). Tighten
and secure with the Wrench (No. 92) and
Spanner (No. 93). Do not fully tighten the
bolts at this time.