Operation Manual
24
Q400 M/F/R Rev.B
ENGLISH
DANGER!
• The wheelchair can only be secured by using the e-down
points on the wheelchair’s frame (Fig. 7.3).
• The e-down points (2 in the front, 2 in the back) are
indicated by the e-down symbol (Fig. 7.2). Fit the front
straps rst, then the rear. Tension the straps to secure the
wheelchair. The wheelchair may not be secured onto any
accessories (wishbones, armrests, an-p brackets etc.).
• No changes or replacements must be made to the
anchorage points/car fastenings on the wheelchair, or to
construconal elements or parts of the frame without
consulng the manufacturer.
• When the wheelchair is transported in a vehicle without
occupant and no restraint system is available then the
wheelchair should be properly stored and secured in the
cargo area during travel.
A
Front Tie Down Points.
B
Rear Tie Down Points.
C
Direction of Travel.
Fig. 7.2
C
B
A
A
B
C
A
A
B
B
C
B
A
B
A
Fig. 7.3
Q400 M
Q400 F
Q400 R