Operation Manual
30
Q400 M/F/R Rev.B
ENGLISH
8.2.4 Removing the castor wheels (M base) (Fig.8.11).
• Use a 17.0 mm spanner/socket to undo the axle bolt.
• Remove the nyloc nut.
Removing the castor wheels (F/R base) (Fig.8.12)
• Use a 13.0 mm wrench and 5 mm Allen key to undo loosen
the screws.
• Remove both screws
Refitting:
When reng do not try to force the bolt through. Gently
move the wheel back and forth unl the bolt slips through
then ghten to a torque of 14Nm.
WARNING!
Always use a new nyloc nut when reng.
Fig. 8.7
Fig. 8.8
Fig. 8.9 Fig. 8.10
Fig. 8.12
Fig. 8.11