Operation Manual

34
Q400 M/F/R Rev.B
ENGLISH
10.0 Trouble shoong
If the wheelchair is not working as it should, check the following points.
• Check whether the baeries are charged.
• Turn the wheelchair o and then back on again.
• Check whether the baery plugs are all securely in place.
• Check whether the freewheel lever is in the DRIVE posion
• Check the posion of the speed regulator.
• Make sure that the controller isn’t locked & Controller
If the problem has not been resolved:
• & Controller
11.0 Technical specicaons: Applicable norms / standards
This product complies with the regulaons and guidelines for medical aids and carries a CE symbol.
The product meets the requirements and standards below. These are checked by independent instuons.
Standard Denion / descripon Test Dummy Weight
EU guideline
93/42 EEC
Applicable as menoned in Appendix 1
EN 12182: 2012
Class B
Assisve products for persons with disability - General
requirements and test methods
SEDEO Pro SEDEO Lite
Q400 M Q400 F Q400 R 136 kg 136 kg
EN 12184: 2014
Class B
Electrically powered wheelchairs, scooters and their chargers
- Requirements and test methods
SEDEO Pro SEDEO Lite
Q400 M Q400 F Q400 R 136 kg 136 kg
ISO 7176-8: 2014
Requirements and test methods for impact, stac and fague
strengths
N/A N/A
ISO 7176-9: 2009 Climate tests for electric wheelchairs N/A N/A
ISO 7176-14: 2008
Requirements and test methods for control systems for
electric wheelchairs
N/A N/A
ISO 7176-16: 2012 Requirements for resistance to ignion of upholstered parts N/A N/A
ISO 7176-19: 2008
Wheelchairs - Part 19: Wheeled mobility devices for use as
seats in motor vehicles:
The Q-series meet the crash test requirements as described
in ISO 7176-19
SEDEO Pro SEDEO Lite
Q400 M Q400 F Q400 R 104 kg 75 kg