user manual

Properly Securing Child

WARNING:

Serious injury or death can result if child is not

properly secured in restraint.

Confirm harness is snug* before each use and after

making any restraint adjustments.

1. Confirm proper restraint installation

2. To loosen harness: lift

harness adjuster and pull

shoulder straps forward

(Fig. 1)

3. Unfasten harness clip

and harness buckle, and

move harness straps to

the sides.

4. Place child in restraint.

5. Position harness straps around child and fasten

buckle and harness clip. (Figs. 2 & 3)

Confirm harness clip and buckle are properly fastened

by gently tugging on each.

6. Gently pull harness straps upward to snugly fit

lap portion of harness which should fit low on

childs body, across the hips.

7. Slowly pull adjuster strap

downward to tighten

harness for a comfortable

and snug fit around child.

(Fig. 4)

* A snug harness strap

should not allow any

slack. It lies in a relatively

straight line without

sagging. It does not press on the childs flesh or

push the childs body into an unnatural position.