user manual

Cleaning and Maintenance

Cleaning / Maintenance of release

mechanism and locking bolts:

Periodically inspect release levers and locking

bolts for cleanliness and proper functioning: When

release levers are lifted, release levers and locking

bolts should spring back immediately and

completely.

WARNING:

 Do NOT use restraint if release levers and

locking bolts do not function properly. There may

be excessive build-up of debris that cannot be

removed or internal damage to the locking

mechanisms that could prevent safe functioning.

 Do NOT oil or lubricate any part of the restraint.

 Do NOT use restraint if there is any appearance

of rust on any metal surface

Remove debris from release

mechanism areas (fig. 1)

with soft bristled brush.

Removing dried liquids or food require more

thorough cleaning:

1. Secure restraint in its folded position (see page

11, folding restraint).

2. Clean with damp cloth only: wet cloth with warm

water and wring thoroughly so it is NOT dripping

water.

3. Towel dry

4. Confirm areas are free of debris and release

mechanisms function properly.

Use ONLY water

Do NOT use solvents, soap, abrasive cleaners or

any detergents.