Product Manual

Form #43219020
June 09 14
16) OPTIONAL PARABOLIC REFLECTOR EXTENSION ASSEMBLY
The heater is completely factory assembled and requires no field assembly. If the optional parabolic reflector
extension is utilized, locate and identify the end panels
and side panels as shown in the following diagram.
Attach the side panels as shown. Attach the end panels
so that the end flanges of the end panels overlap the side
panels. Attach the side panels and end panels together
with the screws provided in the kit. Attach the remaining
screws as shown in Detail A. This is to ensure that the
Parabolic Reflector Extension is securely attached to the
reflector. The clearances to combustibles (shown on the
clearance label that is secured to the reflector on the
control end of the heater and in Section 4 of these
instructions) must be closely observed. Please order the
Parabolic Reflector Extension Kit using the Part Numbers
below:
Model No.
Parabolic Reflector
Extension Kit Number
SG3, SG4 #43822010
SG6, SG8 #43822020
SG10, SG12 #43822030
SG13, SG14, SG15 #43822040
17) OPTIONAL PROTECTIVE REVERB SCREEN
The optional protective Reverb Screen acts as a safety net in
the unlikely event that the ceramic tile assembly is broken by
an outside force. In addition, it increases the overall
emissivity of the radiating surface with a blackbody radiation
effect. It is recommended in high-traffic areas as well as
where improved radiant output is desired. Please order the
Protective Reverb Screen using the Part Numbers listed to
the right:
18) REPLACING PARTS
At all times when parts are being replaced, ensure that both the gas and electrical supplies are disconnected.
Various parts are available from the factory for replacement by a licensed service person. Refer to the exploded
parts guide in Section 20 for all replacement parts.
19) INSTALLATION DATA
Date of
Installation:
Number of
Heaters in System:
Heater Serial Number:
Heater Model:
SG
N =Natural Gas
L =Propane Gas
Model No.
Reverb Screen
Kit Number
SG3, SG4 #43876010
SG6, SG8 #43876020
SG10, SG12 #43876030
SG13, SG14, SG15 #43876040

Sheet Metal
Screw
DETAIL A
(Section View)
Parabolic Reflector Extension
(END PANEL)
Parabolic Reflector Extension
(SIDE PANEL)