Product Manual

–6– Form #43219030
June 09
6) SGM DIMENSIONS
10-3/8
Typical End View
16-3/4
8-3/4
11
30-3/4
16-3/4 16-3/4 16-3/4
Top View
SGM3
Top View
SGM6
Top View
SGM10
Hanging dimensions
(Typical all models)
5/16 ID hole for hanging
(Typical 4 places)
20
21-3/4
52
43-7/32
Gas valve
Reflector assembly
Burner
assembly
7) HANGING
Always suspend from a permanent part of the building structure that can
support the total force and weight of the heater.
Never use the heater to support a ladder or other access equipment.
Improper suspension of the infrared heater may result in collapse and being
crushed.
Failure to do so may result in death, serious injury or property damage.
SUSPENSION HAZARD
The heater can be mounted with the reflector horizontal or angled up to 45º off the horizontal. When the heater is
to be angle mounted, make sure the controls are on the lower side of the heater. Coil chains (No. 2 or larger) or
rigid supports may be used to mount the heater. The long axis of the heater should be level whether the heater is
mounted horizontally or angled.