ST640 User Manual Suntech International Ltd.
ST640U User Manual 1. Intro oduction This doccument desccribes features, protocolss and detail operation of o ST640. If there is another operation description document for special bu uyer to custo omize or mo odel and the conttents of the document is different with this, cu ustomizing document d sh hould be applied for special buyer. b 2. Ove erview Device consists c of WCDMA, W GPS and event parts.
ST640U User Manual Emergen ncy is the firrst to be sen nt after recovvering WCDMA conditio on. 2-3. Se etting Param meter Parametters of devicce can be ch hanged by WCDMA W or SMS, S and so ome control can be realiized also in the sa ame way. Detail protocols are described in Chapter 4. 2-4. Features Key fea atures are described here; - Powerr Down Device can process two step ps of powerr-down, Slee ep and De eep Sleep, ffor reducing g power consumption when the vehicle is parked.
ST640U User Manual It’s applicable only for f models that t have extternal antenna. - Main Power Checcking The devvice can re ecognize the e main pow wer and infform to serrver when main power line is disconnected or ma ain power drrops below preset p value. It’s applicable only for f battery model. m - Batterry Error Alerrt Device can c alert abo out battery error e related d on charging. It’s applicable only for f battery model. m 3.
ST640U User Manual DEV_ID D 6 char. Device e ID of AVL VER “001” Software version that t the devvice has. Field 1 ~ n String Conte ents 4. Com mmands When the device iss received a command,, it respond ds with response string and changes some parametters or acts related operration. 4-1.
ST640U User Manual For no n use, it should be emp pty. PIN_NO O String PIN Number to release PIN lock if it is enabled e [comm mand] ST640N NTW;850000 0;02;0;interne et;;;111.111.1 111.111;8600 0;;;; [respon nse] ST640N NTW;Res;8500 000;010;0;intternet;;; 111.111.111.111;8600;;;; ST640N NTW;Res;8500 000;010;A1;ttim.br;tim;tiim; 111.111.111.111;8600;;;; ** If ne etwork does not require User ID and d Password, these fields should be e empty.
ST640U User Manual If 0, report in driving d will be sent on nly one time when vehiccle starts driiving. T3 String Sec Interrval for sending status re eport in eme ergency mod de Rang ge : 0 ~ 9999 If 0, emergencyy report will be sent on nly one time when emergency state e occurs. A1 String Num mber of attem mpts for em mergency rep port until the e device gets acknowledg ge from servver If 0, no emergen ncy report w will be sent.
ST640U User Manual HD DR DE EV_ID VER IGNITIO ON T T1 T2 IN1_T TYPE IN2 2_TYPE IN3_TYPE IN1_CHA AT IN2_CHAT IN N3_CHAT OUT1__TYPE OUT T2_TYPE OU UT1_ACTIVE OUT2_ACT TIVE PULSE1 1_NO PULS SE1_ON PULSE1_OFF PULSE2_N NO PULSE E2_ON PULLSE2_OFF IN4_T TYPE IN5 5_TYPE I IN4_CHAT IN5_CHA AT BA AUD ● Defin nition : Set S paramete er related evvent. Field Definitions HDR “ST640E EVT” DEV_ID D VER Unit Rem mark Com mmand type 6 cha ar.
ST640U User Manual OUT1_TYPE ‘0’ ~ ‘5’ 0 = GPIO G 1 = immobilizer 2 = Immobilizer I & Auto actiive Auto acctive means immobilizer is activated automatically when w the veh hicle starts p parking. 3 = Pulse 4 = LED Out for indicating ccall status. Refer 7-2-3. 5 = Buzzer OUT1_A ACTIVE ‘0’ or ‘1’ 0 = Open O when out1 is activve 1 = GND G when out1 o is activve PULSE1 1_NO String Pulse e number when out1 typ pe set to pu ulse. Rang ge : 0 ~ 9999 If pu ulse no is 9999, pulsing rruns perman nently.
ST640U User Manual [comm mand] ST640E EVT;850000;0 02;1;60;0;3;2;2;30;20;20;1 1;0;1;0;0;0;0;0 0;0;0;0;0;0;0;0 0 [respon nse] ST640EV VT;Res;85000 00;010;1;60;0 0;3;2;2;30;20;;20;1;0;1;0;0;0 0;0;0;0;0;0;0;0 0;0;0 ** If IG GNITION is set to ‘0’, device d doesn n’t check driiving or parrking state o of the vehicle.
ST640U User Manual IN1_TY YPE ‘0’ ~ ‘5’ 0 = Falling Edge e 1 = Rising Edge 2 = Both Edge (Falling & Rissing) 3 = Panic Button n 4 = Call1 C Button n 5 = Call C 2 Button n 6 = Reserved 7 = Anti-Theft A B Button 13 = Disable Immobilizerr if it’s acttivated by jammer detector. Defa ault = ‘3’. Onlyy the device that includ ded voice op ption (audio o circuit) can be set to ‘Ca all1 Button’ o or ‘Call2 Buttton’. IN1_CH HAT String 100 0ms Input1 chattering g time. Rang ge : 0 ~ 9999 Defa ault = 3 sec.
ST640U User Manual SMS__MT4 IN N_CALL_LOCK K CALL__MO1 CALL_MO2 nition ● Defin CALL__MT1 CA ALL_MT2 CALL_MT3 CALL_MT T4 CALL__MT5 : Set S paramete ers related SMS S or Call. Field Definitio ons HDR “ST640WC CD U Unit Remark R Command C tyype MA” DEV_ID D VER SMS_LO OCK 6 char.
ST640U User Manual 4-5. Se ervice Param meter Settting H HDR DEV_ID VE ER PARKING_LO P OCK SPEED D_LIMIT PW WR_DN C CON_TYPE Z ZIP G GROUP_SEND D MP_CHK ANT_CHK BAT__CHK M__SENSOR CALL GEO__FENCE DATA_LOG ANTITHFFT_CNT1 ANTITHFT_CN A NT2 JAM_DET JAM_CHK_DIST JA AM_CHK_TM M ● Defin nition : Set S paramete ers related re eport. Field Definitions HDR “ST640S SVC” DEV_ID D VER PARKIN NG_LOCK Unit Rem mark Com mmand type 6 cha ar.
ST640U User Manual GROUP P_SEND ‘0’ or ‘1’ Grou up Send for stored data 0 : Disable D 1 : Enable. One packet p can include up to o 5 reports. up send is exxplained below.
ST640U User Manual CON_T TYPE 1. N : The devicce keeps TCP P connection n always and d can receive es a comman nd by WCDM MA. KEEP_CON 2. KEEP_DISC CON : The de evice conneccts TCP conn nection when the data iss sent. Afterr sending, the device discconnects WC CDMA and TCP T connecttion if it estim mates there is no data for f sending within w 3minutes. In this case,, it cannot re eceive a com mmand by WCDMA. W 3. P : The device doesn’t se end any repo ort after be installed.
ST640U User Manual HDR DEV_ID ● Defin nition VE ER SVR_TYPE Definitions HDR “ST640A ADP” VER SVR_TY YPE UDP__ACK DEV__PORT : Setting S addittional param meter requestted. Field DEV_ID D B_SVR_T TYPE 6 cha ar. “02”” ‘T’ / ‘U’ ‘ Un nit Remarrk Comm mand type Device e ID Protocol Version Server Protocol Type P T : TCP U : UD DP B_SVR__TYPE ‘T’ / ‘U’ ‘ Backup p Server Protocol Type T : TCP P U : UD DP UDP_A ACK ‘0’ ~ ‘3’ ACK from Server when w UPD is used.
ST640U User Manual This co ommand can n be applied from softwa are version 22. 2 ACK in n case of UD DP UDP iss protocol that t doesn’tt check whe ether the da ata is transm mitted succe essfully. So, the device checks comple etion of send ding with AC CK dependin ng on UDP_A ACK type. ACK is sent by servver when the data is recceived. If the ACK A is not sent during more than 2 minutes after a sending, the devicce recognize es the data was w not reached to server and a sends th he data again.
ST640U User Manual DEV_ID D 6 char. c VER “0 02” CHR_ST TOP_THRES__12 Strring De evice ID Pro otocol Versio on Vo oltage value to stop ba ackup batterry charging in 12V veh hicle. CHR_ST TOP_THRES__24 Strring Vo oltage value to stop ba ackup batterry charging in 24V veh hicle. DECIDE E_BAT_24 Strring Vo oltage value to check w whether the vehicle’s ba attery is 12V or 24V. OPERA ATION_STOP__THRES_12 Strring Vo oltage value to t protect ve ehicle batterry.
ST640U User Manual Field Definitions HDR “ST640M MSR” DEV_ID D VER SHOCK K_DELAY Un nit Remarrk Comm mand type 6 cha ar. Device e ID “02”” Protocol Version String Sec. Delay for f entering shock detecction mode after ignition off 0 – Dissable Range : 1 ~ 21600 0 (5hour) Recom mmend : 600 ( 10 min.) MOTIO ON_THRES String Ste ep Detection level of shock violattion. Range : 0.04 ~ 2.0 0 Recom mmend : 0.04 4 SHOCK K_THRES String Ste ep Detection level of shock violattion. Range : 0.04 ~ 2.
ST640U User Manual [comm mand] ST640M MSR;;02;600;0.04;0.04;0.7 7;5;10;70;5;10 0;70 [respon nse] ST640M MSR;Res;8525 588;128;600;0.04;0.04;0.7 70;5;10;70;5;1 10;70 * For the t shock le evel, we reccommend it to set to 0.04. 0 if it's over than 0.04, the se ensor will be b more insensitive as it fo or shock dete ection. 4-11. Control C Com mmand HDR R ● Defin nition DEV V_ID V VER CMD_ID : Controls C som me functions.
ST640U User Manual 4-11-2.. Reset ● Defin nition : Reset R all of parameters. p Field Definitions CMD_ID Unit “Resett” Remark Reset meters with factory value and reboot the Initialize all param e. device [comm mand] ST640C CMD;850000 0;02;Reset [respon nse] ST640CMD;Res;850000;010;Reset 4-11-3.. Preset ● Defin nition Field : Reset R all of parameters. p Definitions CMD_ID Unit “Prese et” Remark Reporrt parameter setting valu ues and current device status.
ST640U User Manual DEV;0 0;0;0;0 ** Afte er power on, device send ds response string of pre eset once. ** DEV V filed inform ms current sttatus of device as below w. OUT1 OUT2 2 PWR_DN 0 = Disable 0 = Disable 0 = Normal 1 = Enable 1 = Enable e 1 = Sleep 2 = Deep sleep p Field Definitions CMD_ID Unit BAT__CON 0 = Backup batteryy is disco onnected. 1 = Backup B batte ery is conneccted. Remark “PresettA” Reporrt all parame eters includin ng additiona al parameter.r.
ST640U User Manual 1 = Start Trackin ng 1 = Ena able 4-11-4.. ACK of Em mergency ● Defin nition : Stop S emerge ency report. Field Definitions CMD_ID “AckEme erg” Unit Remark Ackno owledgement of emerge ency report. The device will sto op emergen ncy reports if it is in emergency state. [comm mand] ST640C CMD;850000 0;02;AckEmerg [respon nse] ST640CMD;Res;8500 000;010;AckE Emerg 4-11-5.. Enable1 ● Defin nition : Active A Outpu ut1.
ST640U User Manual ● Defin nition : Inactive Outp put1. Field Definitions CMD_ID “Disable e1” Unit Remark Disablle Output1 [comm mand] ST640C CMD;850000 0;02;Disable1 1 [respon nse] ST640CMD;Res;8500 000;010;Disa able1 [respon nse] ST640CMD;Res;8500 000;010;Disa able1NoUse (in case thatt IN type is set to ‘No Use’). U ** Outp put1 line go oes to inactivve status. 4-11-9.. Request IMSI I ● Defin nition : Request R the unique SIM ID.
ST640U User Manual Field Definitions CMD_ID Unit “ReqVe er” Remark Reque est device ve ersion Device e reports Model, M Buye er, Protocol and S/W release version. [comm mand] ST640C CMD;850000 0;02;ReqVer [respon nse] ST640CMD;Res;8500 000;010;ReqV Ver;ST640E_SAMPLE_STB BASE_001 4-11-12 2. Erase All ● Defin nition Field CMD_ID : Erase E all of data d in buffe er. Definitions Unit “EraseA All” Remark Erase saved all rep ports and diisable outpu uts.
ST640U User Manual ● Defin nition : Initialize the message sequence num mber. Field Definitions CMD_ID “InitMsg gNo” Unit Remark Set message num mber to 0. [comm mand] ST640C CMD;850000 0;02;InitMsgN No [respon nse] ST640CMD;Res;8500 000;010;InitM MsgNo 4-11-23 3. Reboot ● Defin nition : reboot r unit. Field Definitions CMD_ID Un nit “Reboot”” Remark Reboo ot device. [comm mand] ST640C CMD;850000 0;02;Reboot [respon nse] ST640CMD;Res;8500 000;010;Reboot 4-11-24 4.
ST640U User Manual Server Com. Error 2 er or network k parameter is wrong. 1. Serve 2. Serve er is closed. 3. Temporary netwo ork barrier WCDM MA Com.. 3 Error 1. Network parametter is wrong.. bout network using. 2. SIM iss blocked ab 3. Temporary netwo ork barrier k network sig gnal 4. Weak 5. netwo ork antenna connection is not firm. No Network 4 ected. 1. Network antenna is disconne o network antenna is brroken. 2. Network antenna or socket of 3.
ST640U User Manual Norma al 1 No Fix 2 > 1. If power on, GPS G chipsett is trying tto find position during some minutes. S antenna la ays on weak or no GPS ssignal positio on 2. GPS 3. GPS S antenna co onnection is not firm. GPS Ch hipset Error GPS An ntenna Errorr 4 > 1. GPS S antenna is disconnecte ed. 2. GPS S antenna or socket of GPS G antenna a is broken. 3. Uniit is broken.
ST640U User Manual FCC In nformation n to User This equ uipment hass been tested and found d to complyy with the lim mits for a Class B digita al device, pursuan nt to part 15 5 of the FCC C Rules. Thesse limits are designed to o provide re easonable prrotection against harmful inte erference in a residentia al installatio on.
ST640U User Manual IMPOR RTANT NO OTE: FCC RF F Radiatio on Exposure Statem ment: This eq quipment co omplies with h FCC radiation expossure limits set forth ffor an unco ontrolled environm ment. This equipment should be installed an nd operated with minim mum distancce 20cm between n the radiato or & your bo ody. This transmitter mu ust not be co-located c o operating in conjunction with an or ny other anttenna or transmittter.