Warranty

173
173
ChemicalsChemicals
ChemicalsChemicals
Chemicals
Red Epoxy
When you need a sealant you can count on. High Performance, Heat Cured, Two Part, Epoxy Kit
• Exhibits a Color Change When Cured (Turns Gold)
• May Be Cured With a Hot Air Gun or Open Flame in Minutes
• -100°F to 300°F, (-73°C) to (149°C)
• Working Pressure in Excess of 3000 PSI
• Tensile Strength: 6000 PSI
• Works on Vertical Surfaces
• Pressure Tested to 3000 PSI
• Simple, Quick Mixing & Application
• Oil, Gas, Fuel & Solvent Resistant
• No Rush, No Wait, You Control Curing Time
* MSDS Sheets are available for all chemicals, visit www.supco.com
Leak Lock and Leak Lock GOLD with Teflon
A resin based soft setting brushable paste pipe joint compound resistant to all
refrigerants, oils, water and most chemicals, liquids and gases.
• Use with pressures to 10,000 PSI to fullvacuums.
• Temperature range -200°F to 400°F, (-93°C) to (204°C).
• It never hardens and it never becomes brittle.
• Ideal for joining all metals, plastics and other materials.
• Will stick to all clean surfaces.
• Will stick to all clean surfaces.
• Prevent vibration from loosening
nuts, bolts, plugs and fittings.
• Non Toxic
PART SIZE PKG
NO.
HS11001 1 1/3 oz TUBE 12/Case
HS11004 4 oz Brush Top Plastic Jar 12/Case
HS11016 16 oz Brush Top Plastic Jar 12/Case
HS11128 1 Gallon Can 1
PART NO. SIZE PKG
HS12001 Kit Including 2 1/2 oz Tubes 12/Case
• Equipment is Serviceable Immediately
• Use on All Metals and Rigid Plastics
• HVAC & Refrigeration
• Plumbing & Appliances
• Automotive & Marine
• Petrochemical, Manufacturing
• Industrial, Commercial, Institutional
Solderlene
High Quality, Paste Type, Non-Acid Soldering Flux.
• Industrial strength wetting agents to promote solder flow
• For use with low and mid-temp. soft solders, both
lead and lead-free
• Effective on all metals except aluminum and
magnesium.
• Brush Top Plastic Jars
• Effective on all metals except
aluminum and magnesium.
Thawzone (New Formula)
The original liquid dehydrant, frees your frozen system in minutes. It seeks out moisture and
chemically bonds to it.
• Enhanced moisture control in even the most
advanced systems.
• Aids with oil return in low temperature systems.
• Compatible with all refrigerants and refrigeration lubricants.
• Helps prevent the formation of acid.
• No Methanol
• Environmentaly Sound
Add 1/8 fluid ounce ( 3.75 ml ) of THAWZONE directly to the refrigerant of any system for every 1 lb. of
refrigerant in the system.
*HIGHSIDE SYSTEM INJECTOR (part no. HSINJ001) IS RECOMMENDED FOR INTRODUCING
THAWZONE INTO AN OPERATING SYSTEM.
• Safer
• Biodegradable, non-polluting
• Non-Poisonous
Spiro Lite UV Bulb
120 Volt Florescent UV Light Source
For Your Light Trouble
PART NO. PKG
HSUVB001 1
PART NO. SIZE PKG
NO.
HS10001 1 1/3 oz Tube 12/Case
HS10004 4 oz Brush Top Plastic Jar 12/Case
HS10016 16 oz Brush Top Plastic Jar 12/Case
HS10128 1 Gallon Can 1
• GUARANTEES A PERFECT SEAL… UNDER ALL CONDITIONS
PART NO. SIZE PKG
HS30004 4 oz 12/Case
HS30016 16 oz 12/Case
PART NO. BOTTLE SIZE PKG
HS17001 1 oz 24/Case
HS17004 4 oz 12/Case
HS17016 16 oz 6/Case