Warranty

46
VV
VV
V
alves & Fittingsalves & Fittings
alves & Fittingsalves & Fittings
alves & Fittings
BPV Series Bullet
®
Piercing Valves
The ONLY valve with a permanent type, patented gasket application!
SUPCO’s “Bullet
®
Piercing Valve” utilizes the same type of gasket found under the head plate of most air conditioning
compressors. When installed, the gasket actually compresses the copper tubing .020" creating a permanent,
leakproof seal that will withstand any pressure and temperature for the life of
the unit.
Features
• Patented valve gasket application provides 50 times more
sealing area than competitive “O” ring types
• A sealing force of over 180 inch lbs., torque tested with 500
lbs., pressure tested at 250°F
• Precision piercing needle is engineered for concentricity and
hardness to insure perfect seating every time
• Nonpositional mounting — No adapter valve required
• Requires only a 2" clearance area for installation and operation
• Hex key wrench included — No additional tools required
• Corrosion resistant plated and lacquered finish
Applications
• Install on the high side as a permanent valve on the job
• Install on round suction lines or uneven tubing
BPV SERIES BULLET
®
PIERCING VALVES
PART NO. O.D. TUBING SIZE PACKAGING
BPV31* 1/4", 5/16", 3/8" 12/Box
BPV31D* 1/4”, 5/16”, 3/8” 48/Box
BPV21* 1/2", 5/8" 8/Box
BPV36 3/16" 12/Box
BPV14 1/4" 12/Box
BPV56 5/16" 12/Box
BPV38 3/8" 12/Box
BPV12 1/2" 8/Box
BPV58 5/8" 8/Box
BPV34 3/4" 1/Box
BPV78 7/8" 1/Box
*NOTE: BPV31 and BPV21 are furnished with adapter
sleeves for indicated multiple use applications.
Features
• 100% XH-9 beaded molecular sieve
• Hermetically sealed
• Copper shells and end tubes
• High capacity
• Easy break off grooved ends
SUD Series Copper Driers
SUPCO Copper Driers are high quality, high
capacity original equipment components for
use on both domestic and commercial
refrigerators, freezers and air conditioners.
NOTE: All driers are
compatible with all
refrigerants.
SUPCO Copper Extended Driers
PART
NO. 75° 125° 75° 125° R-12 R-22
SUD103 37.5 34 34 32 1/3 1/2
SUD109 37.5 34 34 32 1/3 1/2
SUD110 37.5 34 34 32 1/3 1/2
SUD111 74 68 68 64 3/4 1
SUD112 99 93 95 90 1 2
SUD113 74 68 68 64 3/4 1
SUD114 74 68 68 64 3/4 1
SUD115 37.5 34 34 32 1/3 1/2
SUD116 74 68 68 64 3/4 1
R-12 R-22
DROPS OF WATER REMOVED
RECOMMENDED
TONNAGE
PART DIMENSIONS
NO. DESCRIPTION INLET OUTLET (SEE CHART)
SUD103 1" Plugged Ends 1/4" O. D. 1/4" O. D. A
SUD109 3/4" Non-Directional 1/4" O. D. 1/4" O. D. B
SUD110 3/4" Fused Ends 1/4" O.D. 1/4" O.D. C
SUD111 1" Charging Drier 1/4" O.D. 1/4" Flare 1/4" O.D. or Cap D
SUD112 1" Step Down Drier 5/16" O.D. 5/16" O.D. or Cap E
SUD113 1" Double Inlet (2)1/4" O. D. 1/4" O. D. F
SUD114 1" Fused Ends 1/4" I.D. 1/4" O. D. 1/4" O.D. or Cap G
SUD115 3/4" Charging Drier 1/4" I.D. 1/4" O. D. 1/4" Flare 1/4" O. D. or Cap H
SUD116 1" Step Down Drier 3/16", 1/4", 5/16" I.D. 5/16" I.D. or Cap J
VI2404 3/4" Brass Valve Adapter Icemaker/Humidifier
• 90° constuction to relieve stress on tubing
• 3/4" MHT to 1/4" Compression
• Washer included
• Many icemaker valves require a 3/4" MHT connector
• All brass won’t rust