TDS

Ref.: 11711001, 11711003
Colour: White
Formats:
cartridge 9.8 fl oz (290 ml)
Tube 4.2 fl oz (125 ml)
TECHNICAL DATA SHEET
THE ORIGINAL SUPER GLUE TOTAL TECH WHITE
Product Data Sheet Total Tech
Version: 1.0
Last revision day: 6/11/2019
Page 1 of 2
Product description
The Original Super Glue’s Total Tech is a hybrid sealant
adhesive, free of water and solvents. It contains reactive
technology that combines adhesion and versatility on all
types of materials (delicate materials, galvanized steel,
polycarbonate, PVC) with great flexibility and sealing
properties (sealant) even under water. It combines the best
performance of a sealant and the mechanical capacity of a
construction adhesive.
Technical characteristics
• Resistance to chlorine in a non-permanent way
• Pick-up (Daniels viscometer): 0 in.` – thixotropic
• Dry Residue:> 95%
• Density: 1.44 - 1.48 g / cm
3
• Skin formation (in 0.08” (2 mm) extension, 23ºC,
50% RH): 7 min
• Drying time: 1 h
• Curing depth: 0.12” (3 mm) in 24 h; > 0.2” (5 mm) in
7 days
• Shore Hardness A (DIN 53505): 45 – 50
• Elongation Break (DIN 53504) > 370%
• Tensile strength 430 psi (300Kg / 10cm
2
)
• Traction Resistance: 3.0 Mpa
• Viscosity:> 15000 cP (0.1 s-1); 400-800 cP (5 s-1);
100-450 cP (10 s-1)
Properties
• Color: White
• High filling capacity
• Service: -40ºF - + 194ºF (-40ºC - + 90ºC)
• Application Temp: + 41ºF - + 95ºF (5ºC - + 35ºC)
• Odorless
• Resistant to UV radiation
• 100% paintable during the first 24 hours
• Direct application, no need to aerate facilitating
installation work
• Fast Bonding
Applications
- Sealing of gaskets and expansion joints.
- Bonding and sealing construction materials.
- Bond and fixation of boards, coverings and sheets.
- Bonding and sealing of metal and plastic parts.
- Bonding and sealing of industrial body.
- Bonding of sandwich plates and fixing of insulating
plates (expanded polystyrene, etc.).
- Channelling works (zinc, aluminium, stainless steel,
galvanized, PVC, etc.). Suitable for mirrors, metals.
- Filling and sealing of all types of cracks and fissures
- Does not shrink.
- Does not wet surfaces, does not produce oxidation
or corrosion.
- Filling and sealing of all types of cracks and fissures
- No loss or loss of volume.
- Not suitable for plumbing installations that are
subject to pressure (water, gas, etc.).
- Prior to sealing and/or building aquariums, please
consult Pacer Technology’s technical department.
- Perform previous test in polycarbonate.
- Suitable for adhesions in dry, wet and even
immersion conditions.
- Not suitable for PP, PE, PTFE, PVC laminated, XPE
with laminate.
- Perform a previous test on materials with complex
adhesion.
- Suitable for indoor, outdoor, porous, non-porous,
delicate and non-sensitive materials.
How to use
Surface preparation:
The surfaces to be fixed or sealed must be clean, free of dust
or grease, lichen, mold, or residues of other applications that
could compromise the adhesion of Total Tech. The material
used to clean the supports will depend on the nature of the
product. In metallic or glass supports it will be enough to clean
with a clean cloth moistened in acetone.
In other conditions, consult the cleaning method with support
manufacturer.
Application:
As a sealant:
Cut the cannula to the desired diameter and apply inside the
joint with the help of a suitable caulking gun. For vertical
sealing, apply from the bottom up to avoid the formation of
cavities inside the joint (cracks in tiles, etc.).
If it is necessary to install a joint, seal using a polyethylene
foam cord or, in its absence, extruded or expanded
polyethylene.
Product not suitable for sealing operations that are in direct
contact with water with high concentrations of chlorine, salt
water, hydrocarbons, solvents, acids or strong bases. In this
case the repairs will be temporary and not permanent since
chlorine and salt are very oxidizing and end up degrading
these technologies.
As an adhesive:
Apply in dots or cords on the object to be bonded. Hold the
surfaces with mechanical elements to prevent its movement
and let it dry in its original position for a minimum of 24 hours.
To be painted: