MSDS

Page 2 of 3
6. ACCIDENTAL RELEASE MEASURES:
Spill Procedures
Polymerize with water. Increase ventilation to area. Solid material may be scraped from
surface.
7. HANDLING AND STORAGE:
Handling
Use in well-ventilated area. Avoid contact with eyes, skin and clothing. Avoid breathing (dust, vapor,
mist). Avoid contact with skin, eye and clothing. Keep container closed when not in use. Protect work
surfaces with metal foil.
Storage
Store in a cool place in original container and protect from sunlight. Keep away from sources of ignition.
Ideal storage: 41-50F. Do not store with food products.
8. EXPOSURE CONTROL/PERSONAL PROTECTION:
EYES
SKIN
VENTILATION
OTHER
With possible eye/face
contact, wear safety
glasses.
Wear suitable protective
clothing and gloves
(neoprene).
Use in well-ventilated area
or wear NIOSH full face
respirator with carbon
cartridges.
Facilities storing or utilizing
this material should have
an eyewash facility and a
safety shower.
9. PHYSICAL & CHEMICAL PROPERTIES:
Appearance: Clear, transparent,
colorless liquid
Odor: Irritating odor
Boiling Point: 365 F / 185 C
Specific Gravity (H
2
O=1):
1.06
Solubility in Water: Insoluble,
material becomes solid.
Melting Point: NE
Vapor Density (Air=1):
NE
Vapor Pressure (mm Hg):
1 @ 20C
Evaporation Rate (Butyl
acetate=1): NE
Volatile Organic Compounds-VOC
(less exempt): < 20 g/L
10. STABILITY & REACTIVITY:
Stable: _X__ yes ____ no
Hazardous Polymerization: _____ may occur _X__ may not occur
Incompatible materials:
Polymerized by water, alcohol, amines, alkaline materials and direct UV light.
Conditions to avoid:
Avoid temperatures above 176 F / 80 C, moisture and alkalines.
Hazardous decomposition
products:
Carbon monoxide/dioxide and other toxic or irritating compounds. Oxides of nitrogen
and probably hydrogen cyanide are also possible during combustion.
11. TOXICOLOGICAL INFORMATION:
Oral LD50 = >5000 mg/kg (estimated). Dermal LD50 = >2000 mg/kg (estimated).
Inhalation LC50 notes: Recommended TWA 0.2 ppm. Vapors may be irritating.
12. ECOLOGICAL INFORMATION:
No known hazards.
13. DISPOSAL CONSIDERATIONS:
Polymerize with water to a solid material. Dispose of as solid waste or trash in accordance with local government
regulations of the region.
Product ID
Future Glue Brush-On – 15099
MATERIAL SAFETY
DATA SHEET