SDS

SAFETY DATA SHEET
Date Prepared : 11/25/2013
MSDS No :
Date-Revised : 11/13/2014
Revision No : 4
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P313: Get medical advice/attention.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
Storage:
P403+P235: Store in a well-ventilated place. Keep cool.
Disposal:
7944L5O1: Dispose of in a manner consistent with federal, state, and local regulations.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name Wt.% CAS
Epoxy resin 100 25068-38-6
4. FIRST AID MEASURES
EYES: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15
minutes. Have eyes examined and tested by medical personnel.
SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical attention if symptoms
reoccur. Wash clothing before reuse.
INGESTION: If swallowed, do not induce vomiting. Keep individual calm. Get medical attention and show container label.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical
attention.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
EYES: Causes eye irritation.
SKIN: Irritating to skin. May cause allergic skin reaction with prolonged contact.
SKIN ABSORPTION: None known.
INGESTION: May be irritating. Seek medical advice.
INHALATION: Prolonged or excessive inhalation may cause respiratory tract irritation.
ACUTE TOXICITY: Slightly irritating to eyes and respiratory tracts.
CHRONIC EFFECTS: Frequent or prolonged contact may irritate the skin and cause a skin rash (dermatitis).
5. FIRE FIGHTING MEASURES
FLAMMABLE CLASS: Not Flammable
EXTINGUISHING MEDIA: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this material.
HAZARDOUS COMBUSTION PRODUCTS: Combustion products may include and are not limited to: Carbon monoxide, carbon
dioxide and phenolics.
EXPLOSION HAZARDS: None known.
FIRE FIGHTING PROCEDURES: Use water spray to keep fire-exposed containers cool and to knock down vapors which may
result from product decomposition.
Page 2 of 7
Epoxy Gel - RESIN