Operation Manual

28
SWITCHING THE TV ON/OFF /
OPERATING THE TV / MENU SYSTEM
Programme Selecting
Press “
P+” button to select the next programme or
P-” button to select the previous programme.
Entering Main Menu
Press „MENU“ button to enter Main menu. In the
Main menu select sub-menu using “P-” or “P+
button and enter the sub-menu using “V-” or “V+
button. To learn the usage of the menus, refer to the
Menu System section.
Operating with Remote Control
The remote control handset of your TV is designed to
control all the functions of the model you selected. The
functions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in Menu
System section.
Volume Setting
Press “V+” button to increase volume. Press “V-
button to decrease volume. A volume level scale
(slider) will be displayed at the middle of the bottom
on the screen.
Programme Selecting
(Previous or next programme)
Press „P-“ button to select the previous programme.
Press
„P+“ button to select the next programme.
Programme Selecting (direct access):
Press digit buttons on the remote control handset to
select programmes between 0 and 9. TV will switch
to the selected programme. To select programmes
between 10 - 99, you must use the double digit but-
ton “- -“. This OSD is displayed at the left hand upper
on the screen.
After then, press the digit buttons consecutively which
programme you want to select (eg. for programme
27, first press 2 and then 7). When it is late to press
any digit button this function will be ignored and the
display will be erased. In the same way it must not be
late to press any digit button after entering the first
digit. The limit of the delay time is 3 seconds.
Press directly the programme number to reselect
single digit programmes.
MENU SYSTEM
Your TV has been designed with a menu system, to
provide an easy manipulation of a multi-function sys-
tem. The TV is controlled by choosing the commands,
which are displayed on the screen.
Press the “ ” button. The Main menu will be
displayed at the middle on the screen.
All the selected items in this menu system is indicated
with CYAN characters and with an arrow on the
leftside of items.
To select a sub-menu use „ “ or „
“ button, and
press „
“ or „ “ button.
Main Menu
The menu system is described below.
The short way in order to enter the menus, press :
Menu button has two functions; first is opening or clo-
sing the „MAIN MENU“, and the second is closing the
sub-menu and then opening its parent menu.
Button Main Menu.
Red Button Sound Menu.
Green Button Picture Menu.
Yellow Button Feature Menu.
Blue Button Install Menu.
BDA_Superiour_SPM5521.indd 28 26.03.2007 15:54:43 Uhr