Operation Manual
30
MENU SYSTEM
Setting Sharpness
• Using „
“ or „
“ button select Sharpness.
• Press „
“ button to increase peaking level.
• Press „
“ button to decrease peaking level.
Mode
This item is used to change the picture size.
By pressing „
“ or „ “ button you may choose
one off three options. These are, “4:3”, “16:9” and
“AUTO”.
•
4:3 This option forces the picture ratio to 4:3 mode.
•
16:9 This option forces the picture ratio to 16:9 mode
.
•
AUTO This option is available only if your TV has
WSS feature. This allows to change the picture mode
automatically, according to the transmission of the
selected channel. For example, your TV is 4:3 mode,
but the transmission of that channel is in 16:9 mode. If
you select the AUTO mode, the TV is switched to 16:9
mode automatically. If the TV is in 4:3 mode and the
picture ratio of the channel is also 4:3, there will be no
affect selecting the picture mode to AUTO mode.
WSS feature is only used in TV and FAV modes. For
the Picture Mode selection in AV1 and AV2 the pin 8
(of Scart) value is used. In RGB and S-VHS modes the
Picture Mode can be 4:3 or 16:9 (Auto mode is not
available.).
To Store the Settings
• Press „
“ or „ “ button on STORE option to store
Picture menu settings.
•
The stored picture mode setting will be valid only in
current program. However, the other stored values in
Picture Menu will be valid for all the programmes.
Feature Menu
• To enter the Feature menu directly, press the
“YELLOW” button, or
•
Press “ ” button, now you are in Main menu. In
the Main menu, select FEATURE using
„ “
or
„
“
button. Then enter the Feature menu pressing
„
“ or
„ “
button.
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be
the first selected option. Use „
“ or „ “ button to
change the Sleep Timer values between OFF, 0:15:00,
0:30:00, 0:45:00, 1:00:00, 1:15:00, 1:30:00,
1:45:00 and 2:00:00.
It is displayed on the upper right of the screen. If sleep
timer is activated it is displayed with the TV status and
erased with it after 3 seconds.
If there is left only one minute of the down counting
of the timer, it is displayed automatically on the upper
right of the screen, and stayed there until finishing.
BDA_Superiour_SPM5521.indd 30 26.03.2007 15:54:47 Uhr