Operation Manual

33
GB
MENU SYSTEM / OTHER FEATURES
Autostore
Autostore, searches and stores all channels automa-
tically on your TV, according to the transmission of
programme systems in your area.
Programme item is used in order to store the channels
after Autostore, as from a required programme. In
default the programme number is set to the following
programme after the last set programme. By using
„ “ or „ “ button the number can be changed, in
addition to change number digit button or double digit
button can be used too.
To cancel AUTOSTORE before starting, press “TV”
button. To select “START” use „ “ or „ “ button
and press„ “ or „ “ button. To cancel AUTOSTORE
during running press „ “ or „ “ button.
After Autostore is finalized, a programme list will
apper on the screen. In the programme list you will see
the programme numbers and names assigned to the
programmes.
If you do not accept the locations and/or the pro-
gramme names of programmes, you can change them
in Programme menu.
OTHER FEATURES
TV Status
Programme Number, Programme Name (or AV), (they
are displayed on the upper left of the screen) and
Sleep Timer (shows the time left on the upper right
screen if enabled). In stereo options the sound indicator
is displayed with them too. They are displayed after
programme change during 3 seconds.
Programme Number
Programme Name (5 characters)
These OSD’s are displayed when a new programme is
entered by digit button, or by „
P+
“ or „
P-
“ button,
or by “
TV
” button.
Double-digit (- -)
This OSD is displayed when the “Double-Digit“ button
pressed in place of the programme number indicator.
After then, in order to enter a programme it must be
pressed to two digit consecutively. When it is late to
press any digit button this function will be ignored and
the display will be erased. In the same way it must not
be late to press any digit button after entering the first
digit. The limit of the delay time is 3 seconds.
Picture Mode
If your TV has the WSS feature, the picture mode OSD
is displayed below the sound indicator, by TV Status
OSD’s. According to the WSS data, inside of the OSD
box “4:3” or “16:9” or “Auto” is written.
Sleep Timer Last Minute Indicator
It is displayed on the upper right of the screen. If sleep
timer is activated it is displayed with the TV status and
erased with it after 3 seconds.
If there is left only one minute of the down counting of
the timer, it is displayed automatically on the upper left
of the screen, and stayed there until finishing. Then TV
goes automatically to stand-by.
Mute Indicator
It is placed in the upper middle of the screen when
enabled, and it stays there until it is disabled.
To cancel mute, there is two alternative; the first one
is pressing to “ ” button, thus volume is set to the
preceding value, and the second one is increasing the
volume level, thus it starts at the minimum level to
BDA_Superiour_SPM5521.indd 33 26.03.2007 15:54:50 Uhr