User`s manual

SC216 Chassis Manual
5-8
5-6 Installing the Add-on Cards
Add-on card installation in the SC216 chassis differs between the UIO and low-
prole chassis models. See below for directions that are specic you your chassis
type.
InstallingAdd-onCardsinLow-ProleModelChassis
Installing Add-on Cards - Low-Prole Chassis Models
Remove the chassis cover and ensure that the motherboard has been prop-1.
erly installed.
Locate the vertical add-on card slots in the rear of the SC216 chassis. 2.
Remove the blank bracket which is pre-installed in the chassis.3.
Figure 5-7: Removing the Blank Add-on Card Bracket
Simultaneously slide the add-on card carefully into the bracket and plug it into 4.
the slot on the motherboard.
Screw the add-on card bracket onto the chassis.5.
Figure5-8:InstallingtheLowProleAdd-onCard