User`s manual

2-22
C2SEA/C2SEE User's Manual
JL1
JI2C1
JI2C2
JOH
JPUSB1
JPI1
JWD
JPL1
JPAC
JLED
JPD1
COM1
JPW1
Floopy
JPW2
JWOL
DIMM1
DIMM2
CD1
SPKR1
LE1
JD1
Fan5
Fan4
Fan1
Fan3
Fan2
LAN1
JPUSB2
DIMM2B
DIMM4
DIMM3
USB 10/11
USB 8/9
USB6
1394_2
Slot7 PCI-E x1
Slot6 PCI-E Gen2 x16
Slot3 PCI 33MHz
HD AUDIO
JWOR
CPU
CPU Fan
FP Audio
1394_1
CMOS CLEAR
C2SEA/C2SEE
IDE
VGA
HDMI
USB/0/1
I-SATA3
I-SATA2
I-SATA1
I-SATA0
Slot1 PCI 33MHz
Slot5 PCI 33MHZ
Slot4 PCI-E x4 on x16
KB/Mouse
SPI BIOS
Slot2 PCI 33MHz
DIMM2A DIMM1B DIMM1A
USB7
JF1
USB2/3/4/5
SPDIF_Out
Printer
I-SATA4
I-SATA5
Battery
Intel
G45 (C2SEA)
G43 (C2SEE)
ICH10
Intel
Lan
CTRL
S I/O
IDE
CTRL
A. S/PDIF
B. HDMI Connector
A
B
HDMI Connector (C2SEA only)
A High-Definition Multimedia Interface
(HDMI) connector is located on the IO Back-
plane on the motherboard. This connector
provides HD audio/video interface support
to the onboard audio and video connections.
See the table below for pin denitions.
HDMI
PinDenitions
Pin# Den. Pin# Den.
1 TMDS Data2+ 2 GND
3 TMDS Data2- 4 TMDS Data1+
5 GND 6 TMDS Data1-
7 TMDS Data0+ 8 GND
9 TMDS Data0- 10 TMDS Clock+
11 GND 12 TMDS Clock-
13 NA 14 Reversed (NC)
15 SCL 16 SDA
17 DDC/CED GND 18 +5V PWR <=50mA
19 Hot Plug Detect NA
S/PDIF_Out Connector
An S/PDIF_Out connector is located next to the Backpanel USB ports on the moth-
erboard. The S/PDIF(Sony/Philips Digital Interface Format) connector is used for
transporting stereo digital audio signals. It is commonly used to connect the output of
a DVD player to a home theater receiver that supports Dolby Digital or DTS surround
sound. The S/PDIF_Out connector includes the top component (S/PDIF_RCA) and
the bottom component (S/PDIF). See the tables below for pin denitions.
S/PDIF (Bottom Compo-
nent)PinDenition
Pin# Denition
1 Ground
2 Vcc
3 S/PDIF Signal
S/PDIF_RCA (Top Compo-
nent)PinDenition
Pin Location Denition
Outside Ground
Inside S/PDIF Signal