User`s manual
2-28
C2SEA/C2SEE User's Manual
JL1
JI2C1
JI2C2
JOH
JPUSB1
JPI1
JWD
JPL1
JPAC
JLED
JPD1
COM1
JPW1
Floopy
JPW2
JWOL
DIMM1
DIMM2
CD1
SPKR1
LE1
JD1
Fan5
Fan4
Fan1
Fan3
Fan2
LAN1
JPUSB2
DIMM2B
DIMM4
DIMM3
USB 10/11
USB 8/9
USB6
1394_2
Slot7 PCI-E x1
Slot6 PCI-E Gen2 x16
Slot3 PCI 33MHz
HD AUDIO
JWOR
CPU
CPU Fan
FP Audio
1394_1
CMOS CLEAR
C2SEA/C2SEE
IDE
VGA
HDMI
USB/0/1
I-SATA3
I-SATA2
I-SATA1
I-SATA0
Slot1 PCI 33MHz
Slot5 PCI 33MHZ
Slot4 PCI-E x4 on x16
KB/Mouse
SPI BIOS
Slot2 PCI 33MHz
DIMM2A
DIMM1B
DIMM1A
USB7
JF1
USB2/3/4/5
SPDIF_Out
Printer
I-SATA4
I-SATA5
Battery
Intel
G45 (C2SEA)
G43 (C2SEE)
ICH10
Intel
Lan
CTRL
S I/O
IDE
CTRL
USB Wake-Up
Use JPUSB jumpers to "wake-up" your system
by pressing a key on a USB keyboard or by
clicking the USB mouse of your system. The
JPUSB jumpers are used together with the
USB Wake-Up feature in the BIOS. Enable both
the jumpers and the BIOS setting to allow the
system to "wake-up via USB devices". See the
table on the right for jumper settings and jumper
connections.
Note: JPUSB1 is for Back Panel USB ports
#2~5, and JPUSB2 is for Front Panel USB
ports #6, #7, #8~9 and #10~11.) The default
jumper setting is set to Disabled. However,
when the "USB Wake-Up" function is en-
abled in the BIOS, and the desired USB
ports are enabled via the JPUSB jumper,
please be sure to remove all USB devices
from the USB ports whose USB jumpers are
set to Disabled before the system goes into
the standby mode.
JPUSB1 (Back Panel USB
Wake-up)
Pin# Denition
1-2 Disabled (Default)
2-3 Enabled
JPUSB2 (Front Panel USB
Wake-up)
Pin# Denition
1-2 Disabled (Default)
2-3 Enabled
A. JPUSB1
B. JPUSB2
A
B