User`s manual

4-10
C2SEA/C2SEE User’s Manual
TV Standard
This feature allows the user to determine how TV-Standard is handled by the
system. The options are VBIOS-Default, NTSC, PAL, SECAM, SMPTE 240M,
ITU-R-Television, SMPTE 295M, SMPTE 296M, EIA-770.2, and EIA-770.3.
Spread Spectrum Clock
If Enabled, the BIOS will monitor the level of Electromagnetic Interference
caused by the components and will attempt to decrease the interference when-
ever needed. The options are Enabled and Disabled.
HDA Controller
Select Enabled to enable the High-Denition Audio Controller. The options are
Enabled and Disabled.
Intel VT-d
Select Enabled to enable Intel's Virtualization Technology support for Direct I/O VT-d
by reporting the I/O device assignments to VMM through the DMAR ACPI Tables.
This feature offers fully-protected I/O resource-sharing across the Intel platforms,
providing the user with greater reliability, security and availability in networking and
data-sharing. The settings are Enabled and Disabled.
Active State Power Management
Select Enabled to enable Active-State Power Management for signal transactions
between L0 and L1 Links on the PCI Express Bus in order to maximize power-
saving and transaction speeds. The options are Enabled and Disabled.
USB Functions
This feature allows the user to decide the number of onboard USB ports to be en-
abled. The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8 USB
ports, 10 USB ports, and 12 USB ports.
USBPortConguration
This feature allows the user to congure the USB port settings. The options are 6
x 6 and 8 x 4.
USB2.0 Controller
Select Enabled to activate the onboard USB2.0 controller. The options are En-
abled and Disabled. Note: This function is not available if USB Functions above
is set to more than 8 USB ports.