User Manual

MBI-6128R-T2/T2X MicroBlade Module User’s Manual

4-2

4-1 Control Panel

Each MicroBlade module has a similar control panel (Figure 4-2) with power on/off

button, reset button and LEDs on the front left side of the module. The numbers

mentioned in Figure 4-2 are described in Table 4-2.

Figure 4-2. Blade Control Panel

Table 4-2. Blade Control Panel

Item Function State Description

1 Power Button N/A Turns MicroBlade module on and off

2 Power LED

Green Indicates power status “On”

Amber

Before the BMC is ready, the Amber LED will blink until the

last node out of the four is ready.

Red Power Failure

KVM/UID LED

(Blue)

Steady On Indicates that KVM has been initialized on this blade module

Flashing

Serves as a UID indicator (the UID function is activated with

a management program)

Network LED

(Green)

Flashing Green

Flashes on and off to indicate traffic (Tx and RX data) on the

LAN connection to this blade module.

Network LED

(Orange)

Flashing Orange

Flashes on and off to indicate traffic over the InfiniBand

module (when present in the system)

System Fault

LED (Red)

Steady On

This LED illuminates red when a fatal error occurs. This may

be the result of a memory error, a VGA error or any other

fatal error that prevents the operating system from booting

up.

345