User Manual

4-7
Chapter 4: MicroBlade Module Features
Hard Disk Drives
The MBI-6128R-T2/T2X MicroBlade module accommodates two (2) 2.5" SATA3 HDD/
SSD SATA3 HDD/SSD drives. The drives cannot be removed or replaced without
powering down the blade unit they reside in. See Chapter 1 for information on RAID
Setup.
WARNING: Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the Supermicro Web site
at http://www.supermicro.com/products/nfo/storage.cfm.
Blade Power Consumption Page
Using the Web-based Management Utility from the CMM module you may use the
System Health - Blade Power Consumption page to view graphs and other information
about the power consumption of each MBI-6128R-T2/T2X blade in your system
(Figure).
For more details on the Web-based Management Utility see http://www.supermicro.com/
products/superblade/management/ on the Supermicro Website.
Figure 4-6. System Health - Blade Power Consumption Page