User Manual

5-3

Chapter 5: BIOS

Note: Replace filename.rom by the actual ROM file name (such as B8DTE142.rom for

example) in the command.

5-3 Running Setup

Note: Default settings are in bold text unless otherwise noted.

The BIOS setup options described in this section are selected by choosing the

appropriate text from the M

AIN BIOS SETUP screen. All displayed text is described in this

section, although the screen display is often all you need to understand how to set the

options.

When you first power on the computer, the BIOS is immediately activated.

While the BIOS is in control, the Setup program can be activated in one of two ways:

1. By pressing <D

ELETE> immediately after turning the system on, or

2. When the message Press the <Delete> key to enter Setup appears briefly at the

bottom of the screen during the POST, press the <D

ELETE> key to activate the main

ETUP menu: