User Manual

MBI-6128R-T2/T2X MicroBlade Module User’s Manual
5-6
Table 5-3. Boot Feature Sub-menu
Menu Option Description
Quiet Boot
Use this feature to select the screen display between the POST messages
and the OEM logo upon bootup. Select Disabled to display the POST
messages. Select Enabled to display the OEM logo instead of the normal
POST messages. The options are Enabled and Disabled.
AddOn ROM Display Mode
Use this feature to set the display mode for the Option ROM. Select Keep
Current to display the current AddOn ROM setting. Select Force BIOS to
use the Option ROM display set by the system BIOS. The options are
Force BIOS and Keep Current.
Bootup NUM-Lock
Use this feature to set the Power-on state for the <Numlock> key. The
options are Off and On.
Wait for ‘F1’ If Error
Use this feature to force the system to wait until the 'F1' key is pressed if an
error occurs. The options are Disabled and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, the ROM BIOS of the host adaptors will
"capture" Interrupt 19 at bootup and allow the drives that are attached to
these host adaptors to function as bootable disks. If this item is set to
Disabled, the ROM BIOS of the host adaptors will not capture Interrupt 19,
and the drives attached to these adaptors will not function as bootable
devices. The options are Immediate and Postponed.
Re-try Boot
This feature allows you to set Re-try Boot options to either Disabled,
Legacy Boot or EFI Boot.
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is
inactive for more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
This feature controls how the system shuts down when the power button is
pressed. Select 4_Seconds_Override for the user to power off the system
after pressing and holding the power button for 4 seconds or longer. Select
Instant Off to instantly power off the system as soon as the user presses
the power button. The options are 4 Seconds Override and Instant Off.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select
Stay-Off for the system power to remain off after a power loss. Select
Power-On for the system power to be turned on after a power loss. Select
Last State to allow the system to resume its last power state before a
power loss. The options are Power-On, Stay-Off and Last State.
Table 5-4. CPU Configuration Sub-menu
Menu Option Description
Processor Information
Static processor information is displayed at the top of the menu for
Processor ID, Processor Frequency, Microcode Revision, L1 Cache RAM,
L2 Cache RAM and Processor Version.
Clock Spread Spectrum
If this feature is set to Enabled, the BIOS utility will monitor the level of
Electromagnetic Interference caused by the components and will attempt
to reduce the interference whenever needed. The options are Enabled and
Disabled.
Hyper-Threading (ALL)
This feature enables Hyper Threading (software method to enable/disable
logical processor threadds). Options include Enable or Disable.