User Manual

MBI-6128R-T2/T2X MicroBlade Module User’s Manual
5-8
Table 5-5. Chipset Configuration Sub-menu
Menu Option Description
North Bridge
Configuration
This sub-menu configures North Bridge features and shows configuration
information.
IIO Configuration Use this sub-menu to set IIO configuration features and optons.
EV DFX Features
Set this option to allow DFX Lock Bits to remain clear. Options include
Enable and Disable.
IIO0 Configuration Use this sub-menu to set IIO0 configuration features and optons.
IOU2
(IIO PCIe Port 1)
This setting selects PCIe port bifurcation for selected slot(s). Options
include x4x4, x8 and Auto.
IOU0
(IIO PCIe Port 2)
This setting selects PCIe port bifurcation for selected slot(s). Options
include x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16 and Auto.
IOU1
(IIO PCIe Port 3)
This setting selects PCIe port bifurcation for selected slot(s). Options
include x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16 and Auto.
No PCIe Port
Active ECO
This setting is used for workaround settings when no PCIe port is active.
Options include PCU Squelch exit ignore option and Reset the SQ
FLOP by CSR option.
Socket 0
PCIeD00F0 -
Port 0/DMI
Use this sub-menu for settings related to PCI Express Ports
Link Speed
Link Speed is specified as either Auto, Gen 1 (2.5 GT/s) or Gen 2
(5 GT/s).
PCI-E Port
DeEmphasis
This setting specifies De-Emphasis control (LNKCON2 [6]) for this PCIe
port. Options include -6.0 dB or -3.5 dB.
PCI-E
Information
Information for the PCI-E Port Link for Status, Max and Speed is shown
here.
PCI-E Port
L0s Exit
Latency
This setting specifies the length of time this port requires to complete
transition from L0s to L0. Only the 4us - 8us option is available.
PCI-E Port
L1s Exit
Latency
This setting specifies the length of time this port requires to complete
transition from L1 to L0. Options include settings from <1us all the way to
>64us with 8us - 16us the default.
Fatal Err
Over
Use this setting to Enable or Disable forcing fatal error propagation to the
IIO core error logic for this port.
Non-Fatal Err
Over
Use this setting to Enable or Disable forcing non-fatal error propagation to
the IIO core error logic for this port.
Corr Err Over
Use this setting to Enable or Disable forcing correctable error propagation
to the IIO core error logic for this port.
L0s Support When Disabled, IIO never puts its transmitter in L0s state.
IIO1 Configuration Use this sub-menu to set IIO1 configuration features and optons.
IOU2 (IIO PCIe
Port 1)
This setting selects PCIe port bifurcation for selected slot(s). Options
include x4x4, x8 or Auto.