User Manual

MBI-6128R-T2/T2X MicroBlade Module User’s Manual
5-12
Table 5-8. Server ME Configuration Sub-menu
Menu Option Description
General ME Configuration
Information
General ME configuration information is displayed at the top of this screen.
Altitude
The altitude of the platform location above sea level, expressed in meters,
is set using the keyboard’s number pad “+” or “-” keys. Use the default
80000000 value if the altitude is unkown.
MCTP Bus Owner
This setting is for specifying the MCTP bus owner location on PCIe. Values
can be [15:8] bus, [7:3] device or [2:0] function. If 0, then the sending bus
owner is disabled.
Table 5-9. PCIe/PCI/PnP Configuration Sub-menu
Menu Option Description
PCI Latency Timer
Use this feature to set the latency Timer of each PCI device installed on a
PCI bus. Select 32 to set the PCI latency to 32 PCI clock cycles. The
options are 32 PCI Bus Clocks, 64 PCI Bus Clocks, 96 PCI Bus Clocks,
128 PCI Bus Clocks, 160 PCI Bus Clocks, 192 PCI Bus Clocks, 224 PCI
Bus Clocks and 248 PCI Bus Clocks.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a
PCI Bus Signal Error Event. The options are Disabled and Enabled.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a
PCI Bus Signal Error Event. The options are Enabled and Disabled.
PCI PERR/SERR Support
This setting Enables or Disables the runtime event for SERR/PERR
errors.
Above 4G Decoding
(Available if the system
supports 64-bit PCI
decoding)
Select Enabled to decode a 64-bit PCI device in the space above 4G
Address. The options are Enabled and Disabled.
SR-IOV Support
If the system has SR-10V capable PCIe device, this option Enables or
Disables single root I/O virtualization support.
Maximum Payload
Select Auto to allow the system BIOS to automatically set the maximum
payload value for a PCI-E device to enhance system performance. The
options are Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048
Bytes, and 4096 Bytes.
Maximum Read Request
Select Auto to allow the system BIOS to automatically set the maximum
Read Request size for a PCI-E device to enhance system performance.
The options are Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048
Bytes, and 4096 Bytes.
ASPM Support
This feature allows the user to set the Active State Power Management
(ASPM) level for a PCI-E device. Select Force L0 to force all PCI-E links to
operate at L0 state. Select Auto to allow the system BIOS to automatically
set the ASPM level for the system. Select Disabled to disable ASPM
support. The options are Disabled, Force L0, and Auto.
Enabling ASPM support may cause some PCI-E devices to fail!
MMIOHBase
This setting must specify a number between 4032 - 4078. Options include
56T, 48T, 24T, 2T, 512G and 256G.