User Manual

5-13
Chapter 5: BIOS
MMIO High Size
This setting allocates MMIOH size per CPU. Options include 256G, 128G,
512G and 1024G.
CPU1 Slot 1 PCI-E
OPROM
This setting enables or disables the PCIe Slot OPROM option.Options
include Disabled, Legacy or EFI.
Onboard Video OPROM
Use this setting to control the execution of UEFI and Legacy Video
OPROM on your system. Options include Disabled, Legacy or EFI.
VGA Priority
This setting decides the priority between Onboard and the first Offboard
video device found.
Onboard LAN Option ROM
Type
Select the onboard LAN option ROM type from this setting. Options include
Legacy and EFI.
Onboard LAN 1 OPROM
This setting enables or disables Onbaord LAN 1 Option ROM. Options
include PXE, iSCSI or Disabled.
Onboard LAN 2 OPROM
This setting enables or disables Onbaord LAN 2 Option ROM. Options
include PXE or Disabled.
Network Stack This setting Enables or Disables the UEFI Network Stack.
Table 5-10. SuperIO Device Configuration Sub-menu
Menu Option Description
Super IO Chip
This static display shows the name of the Super IO chip installed for your
system.
Serial Port 1/2
Configuration
This sub-menu allows the user the configure settings of Serial Port 1 or
Serial Port 2.
Serial Port
Select Enabled to enable the a selected onboard serial port. The options
are Enabled and Disabled.
Device Settings This item displays the status of a serial part specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request
address of a serial port specified by the user. Select Auto to allow the BIOS
to automatically assign the base I/O and IRQ address.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12),
(IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7,
9, 10, 11, 12).
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12),
(IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7,
9, 10, 11, 12).
Device Mode
Use this feature to set the optimal setting for a super I/O device. The
options are 24MHz/13 and 24MHz.
Serial Port 2 Attribute
(Available for Serial Port
2 only)
This feature specifies the attribute of Serial Port 1. The options are SOL
and COM.
Table 5-9. PCIe/PCI/PnP Configuration Sub-menu (Continued)
Menu Option Description