User Manual

MBI-6128R-T2/T2X MicroBlade Module User’s Manual
5-16
Table 5-12. ACPI Settings Sub-menu
Menu Option Description
WHEA Support
This feature Enables the Windows Hardware Error Architecture (WHEA) support
for the Windows 2008 (or a later vision) operating system. The options are
Enabled and Disabled.
High Precision Event
Timer
Select Enabled to activate the High Performance Event Timer (HPET) that
produces periodic interrupts at a much higher frequency than a Real-time Clock
(RTC) does in synchronizing multimedia streams, providing smooth playback
and reducing the dependency on other timestamp calculation devices, such as
an x86 RDTSC Instruction embedded in the CPU. The High Performance Event
Timer is used to replace the 8254 Programmable Interval Timer. The options are
Enabled and Disabled.
NUMA Use this setting to Enable or Disable NUMA.
PCI AER Support This setting allows you to Enable or Disable PCI AER Support.
Table 5-13. Trusted Computer Sub-menu
Menu Option Description
Security Device
Support
This setting Enables or Disables BIOS support for a security device. The OS will
not show the security device if enabled. TCG EFI protocol and INT1A interface
will not be available.
TPM State
This setting Enables or Disables a security device.
NOTE: Your computer will reboot during restart in order to change the state of
the device.
Pending Operation
This setting schedules an operation for the security device. Options include
None and TPM Clear.
NOTE: Your computer will reboot during restart in order to change the state of
the device.
Current Status
Information
Static information about TPM Enabled Status, TPM Active Status and TPM
Owner Status are displayed in this location.
TXT Support This setting Enables or Disables TXT support.
Table 5-14. iSCSI Configuration Sub-menu
Menu Option Description
iSCSI Initiator Name
Use this setting to enter a unique name of the iSCSI Initiator. Only IQN format is
accepted. Range is from 4 to 223.