User Manual

A-5

Appendix A: AMI UEFI BIOS POST Codes

0xFA Invalid recovery capsule

0xFB – 0xFF Reserved for future AMI error codes

Table A-4. PEI Beep Codes

# of Beeps Description

1 Memory not Installed

Memory was installed twice (InstallPeiMemory routine in PEI Core called

twice)

2 Recovery started

3 DXEIPL was not found

3 DXE Core Firmware Volume was not found

4 Recovery failed

4 S3 Resume failed

7 Reset PPI is not available

Table A-5. DXE Phase

Status Codes Description

0x60 DXE Core is started

0x61 NVRAM initialization

0x62 Installation of the South Bridge Runtime Services

0x63 CPU DXE initialization is started

0x64 CPU DXE initialization (CPU module specific)

0x65 CPU DXE initialization (CPU module specific)

0x66 CPU DXE initialization (CPU module specific)

0x67 CPU DXE initialization (CPU module specific)

0x68 PCI host bridge initialization

0x69 North Bridge DXE initialization is started

0x6A North Bridge DXE SMM initialization is started

0x6B North Bridge DXE initialization (North Bridge module specific)

0x6C North Bridge DXE initialization (North Bridge module specific)

0x6D North Bridge DXE initialization (North Bridge module specific)

0x6E North Bridge DXE initialization (North Bridge module specific)

0x6F North Bridge DXE initialization (North Bridge module specific)

Table A-3. PEI Phase

Status Codes Description