User Manual

Chapter 4: AMI BIOS
4-19
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard, and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unied
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.

Super IO Conguration
Super IO Chip
Displays the Super IO chip type.

Serial Port 0 Conguration
The submenus allow the user to congure the following settings for Serial Port 0:
Serial Port
Select Enabled to enable a serial port specied by the user. The options are
Enabled and Disabled.
Device Settings
This feature indicates whether or not a reset is required for a serial port specied.
Change Settings
This option species the base I/O port address and the Interrupt Request address
of Serial Port 0. The options for Serial Port 0 are:
Auto,
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
P/S 2 Connector
This option enables the selection of keyboard or mouse for the PS/2 connector.
The options are Keyboard or Mouse.