BLACK MAGICK HEAD AND COMBO User Manual All Contents © Bond Audio LLC 2021
1. IMPORTANT SAFETY INFORMATION The triangle surrounding an exclamation mark alerts users to the presence of important warnings or information. The triangle surrounding a lightning bolt alerts users to the presence of dangerous high-voltage within the enclosure of the products that can pose a significant risk of electrical shock. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth.
CONTENTS 1 Important Safety Information 2 Contents 3 2 Anatomy and Usage 4 2.1 Front Panel.......................................................................................................................................................... 4 2.2 Rear Panel........................................................................................................................................................... 5 2.3 Setting Tones......................................................................
2. ANATOMY AND USAGE 2.1 FRONT PANEL IN 1+2 Instrument input for using channel 1 and channel 2 in parallel. Plugging an instrument into this input, sends the signal to both preamps in parallel. When a second instrument is connected to In 2, In 1+2 only connects to channel 1. IN 2 Instrument input for using channel two by itself. VOL 1 Controls the volume level of channel 1. VOL 2 Controls the volume level of channel 2. TONE Controls Bass/Treble balance. SPEED Controls the speed of the Tremolo effect.
2.2 REAR PANEL SPEAKER OUTPUTS The Black Magick provides one 8 Ohm and two 4 Ohm speaker outputs. When using a single 8 Ohm speaker, such as the internal speaker, connect the speaker or cabinet to the 8 Ohm jack. If using two 8 Ohm speakers or cabinets, plug them both into the 4 Ohm jacks. (The logic here is that two 8 Ohm loads connected in parallel add up to a 4 Ohm total load.) When using the internal speaker with an extension cabinet, be sure to move the internal speaker to one of the 4 Ohm outputs.
2.4 TUBES Each Supro tube amplifier is a 100% analog, 100% tube amplifier. There are no solid state (transistor) devices in any audio signal path. Viewed from the rear of the amp: 12AX7 PREAMP 6973 12AX7 12AX7 TREMOLO PREAMP 12AX7 6973 PHASE INVERTER POWER TUBES 2.5 TROUBLESHOOTING Supro products have been designed for years of trouble-free service. There are many unique protection features to the design.
This warranty covers the cost of both labor and materials on repairs deemed necessary by our Customer Service Representative which includes: • Amplifiers: 1 year (Extended to 2 if registered) • Speaker Cabinets: 1 year (Extended to 2 if registered) • Tubes and speakers: 90 days • Effects Pedals: 1 year (Extended to 2 if registered) THIS WARRANTY DOES NOT COVER: • Any product that has been altered or modified in any way or upon which the serial number has been tampered with or altered.
suprousa.
