User guide

7A
Grill Assembly
a. On the inside bottom of the side burner assembly
you will nd the brass burner cap attached with tape.
Remove and set aside.
b. Feed the side burner gas supply hose assembly
through the side of the cart.
c. Loosen the four (4) 5/16-24 Hex Head Screws on the
right side of the grill.
d. Attach the Right Side Burner Shelf (7A) by inserting
the four (4) screws on the side of the grill head into the
holes on the right shelf.
e. Tighten the screws with wrench.
f. Install one self-tapping screw into the bottom front
slotted hole of the shelf. This will permanently lock the
shelf in place.
STEP SEVEN
Close view for Step 7f
12