Owner's manual

STEP ELEVEN

a. Place the electronic igniter button into the igniter hole on the

front left of the side burner shelf.

b. Secure the igniter in place using the plastic lock nut. Make

sure to tighten securely.

c. Install AA battery, negative side first.

d. Install spring and cap assembly and tighten securely.

e. Attach the two igniter wires to the igniter button and igniter

module.

Note: Make sure you follow the left picture to attach them.

f. Attach loose wire to bottom of cast burner, and then to any of

the open tabs in the igniter. Insert the three igniter wires fed

through the grommeted hole on side of grill cart in Step 9 into

the remaining three holes.

Note: The igniter module is designed in such a way that it

does not matter which terminal tab is used when connecting

igniter wires.

Assembly

11a

11b

11c

11d

close-up of igniter wires attaching to igniter module

close-up of igniter wire attaching to burner