Owner's manual

Assembly
9
The Spare L.P. Gas Tank
Barrier must be installed to
prevent storage of spare L.P. Gas Tanks.
Failure to comply with these instructions
could result in a fire or explosion that could
cause serious bodily injury, death, or
property damage.
3a
3e
3f
3d
STEP THREE
a. Press the cart sides back together making sure that the cart
side flanges cover the cart back flange.
b. Attach three (3) self tapping screws through the pre-drilled
holes on the Cart Side Left into the cart back. Repeat for Cart
Side Right.
c. Tighten all six (6) caster assembly nuts with a wrench.
d. Slide the Tank Tray out of the bracket, and place the it on the
Cart Base, the handle of the tray toward front of the Cart Base.
Attach three (3) self tapping screws through the pre-drilled holes
on the Left Bracket into the Cart Base. Repeat on the Bracket
Right. Then Slide the tray into the Bracket.
e. Attach the Spare L.P. Gas Tank Barrier by inserting the tabs
into the slots in the Cart Back and then attach the flat end of the
barrier to the pre-drilled hole in the Cart Back with a self-tapping
screw.
f. Attach the Tank Secure Ring onto the Cart Back.