Instruction Manual

1. Remove the six (6) screws on the inside of the

grill that hold the rear infrared cover in place.

(See Fig. 30)

2. Close the grill hood slowly.

3. Grasp rear infrared cover and remove it from the

grill. (See Fig. 31)

4. Use the wrench supplied with this kit to remove

the LP orifice. (See Fig. 32)

5. NG orifice. (See Fig 19 on page 5)

6. Install the NG orifice. (See Fig 33)

7. Use the screws removed in step 1 to secure the

rear infrared cover. (See Fig. 30)

Note: At the completion of the conversion, a

leaktest should be performed on all fittings.See

Use and Care manual for leak testing procedure.

Installation is now complete.

Enjoy your grill safely.

Fig 31

SGR30M Natural Gas Conversion Instructions

Fig 30

Fig 32

Orifice

RACEZ00013A

19/10/2006

Conversion Kit Assembly Picture