Manual

REMOTE CONTROL INFORMATION
TECHNICAL DATA
REMOTE CONTROL:
Supply voltage:
4.5V(three1.5V“AAA”batteries)
Ambient Temperature Ratings:
0-60ºC(32-140ºF)
Radio frequency:
315MHz
RECEIVER:
Supply voltage:
6.0V(four1.5V“AA”batteries)
Ambient temperature ratings:
0-60°C(32-140°F)
Radio frequency:
315MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
1). Thisdevicemaynotcauseharmfulinterference,AND
2). Thisdevicemustacceptanyinterferencereceived,including
interference that may cause undesired operation.
Changesormodicationsnotexpresslyapprovedbytheparty
responsibleforcompliancecouldvoidtheuser’sauthoritytooperate
theequipment.
WARNING
Thetransmitterandthereceiverareradiofrequencyappliances.Ifthe
receiverismountedinsidemetalliccases,severelossofperformances
(reductionoftherangeworking)mayresult.
ATTENTION:
- Turn“OFF”maingassupplyoftheapplianceduringinstallationor
maintenance of the receiver.
- Placethereceiver’s3positionsliderswitchinthe“OFF”position
during installation or maintenance.
- Turn“OFF”maingassupplyoftheappliancepriortoremovingor
reinserting the batteries in the receiver.
COMMUNICATION BETWEEN
THE REMOTE CONTROL
AND THE RECEIVER
Toprogramthetransmittertothereceiver,
move the three positions slider of the receiver
intheREMOTEpositionanddepressthe
ON/OFFkeyofthetransmitter.TheSystem
hasgotanautomaticlearningmodethatallows
thereceivertomatewithanewtransmitterin
the event that the transmitter must be replaced.
Assoonasthereceiverreceivestherst
correct command from any remote control it
capturesthenewaddressandthen“beeps”
3timestoconrmthesynchronizationand
commandexecution.
Transmission
Light
ON/OFF
Key
Side
Slider
Child safety
function OFF
Child safety
function ON
CHILD SAFETY LOCK-OUT FEATURE
Withthisfunctionitispossibletodeactivatetheremotecontrolkey.
BACKUP FUNCTION
IfthebatteriesoftheReceiverarelow,theappliance
canbeswitchedonmanuallybymovingthe3
positionsliderswitchontheReceivertotheON
position.
INSTALLING BATTERIES
Install four (4) “AA”
batteries into the
remote receiver box
as shown on the left.
Install three (3)
“AAA” batteries into
the remote control as
shown on the left.