Specification

TECHNICAL DATA
AccuLED Optics
The AccuLED precision engineered optics
display sharp cutoffs and oval light pattern,
which provide a clear path of egress per
UL924 standards. The efficient optical
design increases spacing distance between
units, while providing evenly diffused light
pattern throughout the egress path for both
1 foot candle average and 0.1 ft candle
minimum. The lens swivel feature within
the AccuLED optic provides the opportunity
of forward-throw of egress lighting.
Mechanical Housing
All components are injection molded with
a color stable, high impact thermoplastic
resin. The surface is textured to improve
aesthetic appearance. The housing
construction is designed with snap-fit
components and reinforcement ribs to
provide maximum strength at minimum
installation effort. The mounting hole
pattern is universal to junction box
requirements and is suitable for wall mount
applications.
EZ Hang – Mounting Feature
The hands-free EZ Hang feature allows the
installer to hang the emergency light face
from the back plate in order to easily and
efficiently make the power connections.
Eagle Eye™ Self Diagnostics
The Eagle Eye self-diagnostic software will
automatically perform all tests required
by UL924, and NFPA101. The system
indicates the status of the emergency light
at all times using the LED indicator. A 90
minute battery power (emergency mode)
simulation test will occur once every
12 months. A 30 second battery power
simulation test will occur every 30 days.
The Solid-State microprocessor based
system has the ability to accurately
detect and warn of system failures, plus it
incorporates all of the standard electronic
features that sets Sure-Lites apart from
its competition. Eagle Eye self diagnostic
software automatically performs all testing
required by the NFPA 101 Life Safety Code
and systematically calibrates itself in
the field, reducing installation labor and
eliminating manual calibration errors.
Low Voltage Disconnect
When the battery’s terminal voltage falls,
the low-voltage circuitry disconnects the
lighting load. The disconnect remains in
effect until normal utility power is restored
preventing deep battery discharge.
Brownout Circuit
The brownout circuit monitors the flow
of AC current to the unit and activates
the emergency light heads when a
predetermined reduction of AC power
occurs.
Warranty
The SELW series is backed by a five-year
warranty on the fixtures and a seven-year
pro-rata warranty on the NiCad batteries.
Emergency Light
SELW
SELF DIAGNOSTIC TESTING OPERATIONS
The Sure-Lites Eagle Eye Self Diagnostics is continuously monitoring your emergency fixture, and will signal any failure through the 3
color indicator LED.
Initial Operation:
When the unit is first powered up, it will go into a 24 hour fast charge, indicated by the indicator LED pulsing green. Once the unit has
fully charged, it will perform a self calibration, after which the LED will change to steady green, indicating the unit is fully charged and float
charging the battery to maintain readiness.
Automatic Testing:
The unit will perform a battery capacity, lamp/LED, and charge circuit test every 30 days for 30 seconds. During this time, the indicator LED
will change to a steady yellow. It will perform a full battery capacity (90 minute) test once per year. During this time, the indicator LED will
change to a blinking yellow.
Manual Testing:
10 Second “Installation” test – Press and release the test button once during fast charge (blinking green) to initiate a 10 second quick
test. The sign will switch to emergency mode for 10 seconds allowing the installer to verify proper installation of the unit, and the LED
indicator will turn solid yellow
30 Second Test - Press and release the test button once during float charge (steady green). The indicator LED will turn steady yellow to
indicate the unit is performing a 30 second test of the batteries and lamps/LEDs
90 Minute Test - Press and release the test button a second time during a 30 second test (steady yellow) to change to a 90 minute test.
During this test, the LED indicator will change to blinking yellow, and the circuit will perform a full battery capacity, charge circuit, and
LED test
Canceling Test – Press and release the test button during the 90 minute test (flashing yellow) to return the fixture to its original state (fast
charge or float charge)
Laser Test:
The SD versions are equipped with a Laser Test function, that allows the unit to be manually tested without the need to physically press the
test button. Shining a laser pointer in the hole marked “LASER TEST” on the bottom of the unit has the same effect as a press and release
of the test button.
Clearing Failure Codes:
A battery failure (LED two blink red) can be cleared by replacing the battery. Disconnecting the battery and AC power, or performing a full
90 minute discharge, will reset the error code, however, it will return if the battery is faulty
Charge Circuit (LED three blink red) and lamp/LED failure (LED four blink red) will clear when the unit successfully passes a manual or