Installation Instructions
MATERIAL SAFETY DATA SHEET
Page 4 of 6
9. PHYSICAL and CHEMICAL PROPERTIES
SOFTENING POINT: 176°F (80°C) EVAPORATION RATE (n-BuAc=1): Not applicable
SPECIFIC GRAVITY @ 20C: 0.918 - 0.960 (water=1) SOLUBILITY IN WATER: Non soluble
VAPOR PRESSURE, mm Hg @ 20°C (68F): NA pH: NA
ODOR THRESHOLD: Negligible to no odor
APPEARANCE, ODOR and COLOR: This product is a solid in various colors, with no odor.
10. STABILITY and REACTIVITY
STABILITY: Stable.
DECOMPOSITION PRODUCTS: Thermal degradation produces carbon monoxide, carbon dioxide and/or low molecular
weight hydrocarbons.
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: The product may react to strong acids, bases and oxidizing
agents.
POSSIBILITY OF HAZARDOUS REACTIONS: Will not occur.
CONDITIONS TO AVOID: Avoid excessive overheating. Do not add water or other volatile material to molten adhesive.
11. TOXICOLOGICAL INFORMATION
TOXICITY DATA: No Data Available
SUSPECTED CANCER AGENT: The components of this product are not listed by agencies tracking the carcinogenic
potential of chemical compounds as follows:
Carcinogenity
NTP Regulated
No
IARC Regulated
No
OSHA Regulated
No
IRITANCY OF PRODUCT: This product can cause skin and eye irritation.
SENSITIZATION TO THE PRODUCT: These products are not known to cause human skin or respiratory sensitization.
REPRODUCTIVE TOXICITY INFORMATION: Listed below is information concerning the effects of this product and its
components on the human reproductive system.
Mutagenicity: The components of this product are not reported to produce mutagenic effects in humans.
Embryotoxicity: The components of this product are not reported to produce embryotoxic effects in humans.
Teratogenicity: The components of this product are not reported to produce teratogenicity effects in humans.
Reproductive Toxicity: The components of this product are not reported to produce reproductive effects in humans. .
12. ECOLOGICAL INFORMATION
ALL WORK PRACTICES MUST BE AIMED AT ELIMINATING ENVIRONMENTAL CONTAMINATION.
MOBILITY IN SOIL: These products have not been tested for mobility in soil.
PERSISTENCE/DEGRADABILITY: These products have not been tested for persistence or biodegradability. The
components may slowly degrade in the environment and form a variety of organic and inorganic materials; however, no
specific information is known.
ENVIRONMENTAL STABILITY: Controls should be engineered to prevent release to the environment, including
procedures to prevent spills, atmospheric release and release to waterways
BIOACCUMULATION/ACCUMULATION: These products have not been tested for bio-accumulation potential.