Full Product Manual

OPERATION
Trigger
Insulated
Interchangeable
Nozzle
Ergonomic handle
Battery Pack
Battery Charger
Pro2-60
Cordless
Glue Gun
3
4
Battery Power
On/Off switch
Cordless Features:
• 18 Volt, 120 Watts
• Use with Ryobi P128-18V One+Lithium-Ion battery and charger kit
Technical Data
Glue Stick Size - 7/16” (.43”) Standard (10" and 15" lengths)
Cordless Heating Power - 18 Volt, 120 watts
Operating Temperature - 193°C / 380°F
Glue Gun Weight - .80 lbs.
Features
Ryobi 18V
Lithium-Ion
Battery
(not included)
• P102 Ryobi 18V Lithium-ion Compact Battery,1 hour use
+
• P108 Ryobi 18V Lithium-ion+ High Capacity Battery, 4 hour use
• P117 Ryobi 18V Lithium-ion+ 1hour charger
• P125 Ryobi 18V Lithium-ion+ 1hour, 6 port charger
Batteries Sold Separately at Home Depot Stores
Chargers Sold Separately at Home Depot Stores
Turning Off your Industrial Cordless Glue Gun
Cordless: Turn glue gun on/off switch to the “off” position. Wait one minute for the gun to begin
cooling, squeeze trigger 3 or 4 times to clear nozzle of melted glue and advance glue stick into the
melting chamber. This will allow a quicker startup the next time the glue gun is used. Allow glue
gun to cool in its normal vertical position, after 60 minutes it should be cool enough to store away.
Recharge battery for next use.
Preventive Maintenance
®
For best results, use only Surebonder 7/16”, 1/2”, (.43”) standard glue sticks.
DO NOT pull glue stick out of the back of the glue gun or tilt glue gun back, this may cause glue to
flow out back of glue gun, causing a condition called “back-melt.” Back-melt can cause skin burns
and/or permanent damage to the glue gun.
P128 Ryobi Battery/Charger (both included)
Pro2-60Kit also available and Includes: Pro2-60 Glue Gun, #P128 Ryobi 18V
Lithium-Ion One+Compact Battery & Charger. Available at www.surebonder.com
Introducing our new Pro2-60 18 Volt Lithium Cordless Glue Gun. The Pro2-60 has a
lightweight slim design with a cordless feature that allows versatility to go anywhere. Powered
by an 18V Lithium-ion compact battery, it allows up to 1 hour of continuous cordless operating
time. Great for industrial, outdoor applications and mobility!
Preparing for Use
Pro2-60 cordless glue gun is recommended to be used with the #P128 Ryobi 18V battery and
charger (sold separately).
- Slide fully charged battery into bottom of glue gun and lock into place.
- Turn on/off switch to “On” position to turn on your glue gun.
- Allow glue gun to heat for 5 to 8 minutes.
- Insert a standard size glue stick (7/16”, (.43”) into the back of your glue gun.
- When gun is fully heated, squeeze trigger slowly until melted glue is flowing through the nozzle.
- Always release trigger to stop flow of melted glue through the nozzle. (various nozzles available
for various applications.
- Battery operating time is approximately 1 hour for the #P102 Ryobi 24WH 18V Battery. For
battery with increased operating time, use the #P108 (4 hour )Ryobi high capacity battery.
Ryobi batteries are sold at Home Depot stores.
-To recharge and care for batteries: Read and follow all instructions on your battery instruction
manual.
Important Glue Gun Safety Information
-It is normal for your glue gun to become warm during use.
-The glue gun should be turned to the “Off” position after each use.
-If you accidently touch the molted hot glue, immediately immerse the affected area in cold water
and call a doctor. The injured area should be attended by a medical professional.
-Some materials are heat sensitive and can be damaged by the hot nozzle or even the hot glue.
Whenever possible, test a piece of scrap material or a hidden portion of the object being repaired
before starting your gluing application.