Model 318GH 618GH Waterproof Tactical Light Users Manual Remington 870 12 Gauge Shotgun Revision N/C 9-1-95
Model 318G & 618G Waterproof Tactical Light Introduction The Model 318GH & 618GH Waterproof Tactical light provides a rugged and reliable source of high intensity light that is integrated into the fore-arm of the shotgun. The lamp is shock isolated. A two button ON/OFF switch and a Pressure Switch are located on the right side of the H18GH Housing and wired in series. The Pressure Switch is stiffened to prevent turn on during deep submersion.
Model 318G & 618G Waterproof Tactical Light Lamp Replacement 1. Unscrew Bezel from Lamp Housing. Lift Lamp assembly out of Bezel. 2. Install replacement Lamp Assembly in Bezel and reassemble by screwing onto Lamp Housing until it is fully seated. Battery Replacement 1. Unscrew Lamp Housing from H18GH Housing and shake out old battery. 2. Install new battery with the + terminal facing out. 3. Reinstall Lamp Module.
Sure-Fire LLC
Model 318GH & 618GH Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored. Do not use a 3 Volt Lamp in a 6 Volt system.
