Manual

Model 318G & 618G Waterproof Tactical Light
Lamp Replacement
1. Unscrew Bezel from Lamp Housing. Lift Lamp assembly out of Bezel.
2. Install replacement Lamp Assembly in Bezel and reassemble by screwing
onto Lamp Housing until it is fully seated.
Battery Replacement
1. Unscrew Lamp Housing from H18GH Housing and shake out old battery.
2. Install new battery with the + terminal facing out.
3. Reinstall Lamp Module.
Switch Blocker Installation
If you want to disable the part of the pressure switch where you rest your hand, (and don’t
want the light to come on) you can cover it with the Model Z10 Switch Blocker. First clean the
portion of the Pressure Switch to be disabled using the Alcohol Wipe from the Kit. Then
remove the paper backing from the underside of the Switch Blocker and press the Switch
Blocker in place on the Pressure Switch
WARNING
Lithium batteries can explode or cause burns if disas-
sembled, shorted, recharged or exposed to fire or high
temperatures. Please handle with care.