Full Product Manual

12
Click for contents
Display: Live
Each camera input on your DVR will be displayed as CH1, CH2, etc.
Setup: Click the button to access the camera display settings:
Channel: Select a camera that you would like to edit.
Channel Name: Enter a name for the camera selected. It can be up to 16
characters in length.
Date Format: Click the drop down menu to select the preferred date format.
Time Format: Click the drop down menu to select the preferred time format.
Camera Type: This setting is used to instruct your DVR on the camera type
connected. For the cameras included with your DVR, leave the default set-
ting. However, if you are connecting cameras that you have purchased previ-
ously or upgrading from an older security system and the image is black &
white, change this to TVI or AHD, depending on your camera type. Click the
drop down menu then select the camera type for your camera.
Covert: When enabled, the camera will detect motion and trigger your DVR
to record, but you will not see an image of the camera in Live View mode.
This may be suitable if your DVR and TV are displayed in a public area (shop,
warehouse, etc.), but you don’t want others to see an image from the camera.
Show Name: Leave this enabled to display the camera name in Live View
mode, otherwise click the checkbox to disable.
Record Time: Leave this enabled, as a timestamp will be embedded on all
video recordings. This allows you to easily identify when events have oc-
curred. Click the checkbox if you wish to disable.
(continued on next page)
The configuration options available allow you
to name each camera relevant to where it has
been installed as well as the ability to adjust
image settings such as brightness and con-
trast. You can also enable covert mode to hide
the camera’s image in Live View mode.
→ Use the “Copy” function to apply all set-
tings to the other cameras connected.
→ Click “Default” to revert to default settings.
→ Click “Apply” to save settings.