Full Product Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode
- Live View Icons & Controls
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Enabling a Privacy Mask
- Record: Mainstream
- Record: Substream
- Alarm: Detection
- Alarm: Detection - Actions
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Alarm: Deterrent
- Spotlight Detection Setup
- Spotlight Trigger Schedule
- Device: PTZ
- Recording Configuration
- Record: Record
- Alarm: Detection
- Capture: Capture
- Capture: Schedule
- System Configuration
- Display: Display Configuration
- Network: Network
- Network: Email Configuration
- Network: Email Schedule
- Network: DDNS
- Network: IP Filter
- Network: Date and Time
- Device: HDD
- Device: S.M.A.R.T
- Device: Cloud Storage
- System: General
- System: Users
- Advanced: Maintain
- Advanced: Events
- Advanced: Auto Upgrade
- System Status
- System: Info
- System: Channel Information
- System: Record Info
- System: Network State
- Glossary
- Warranty Information
21
Click for contents
Motion Detection Setup
1. Click “Clear All” to delete the default motion detection area.
2. To create a new motion detection area, press and hold the left mouse button to select the
cell or square that you want to start at, then click and drag to select the area that you want
to create. Release the mouse to finish.
3. Multiple areas can be created. Each individual cell or square can be enabled to detect
motion. The same action also applies to delete an area that has been created.
In the example provided, a motion detection area has been created for the front yard but
excludes objects such as trees as well as cars and pedestrians adjacent to the front yard
of the house. Anyone who walks along the path via the front entrance and approaches the
front door will be detected.
Movement outside of the motion detection areas will not be detected so will not trigger
recordings or event notifications.
4. Adjust the sensitivity if required then right-click the mouse to exit.
5. Click “Apply” to save changes made.
Each single square or
cell can be enabled to
detect motion.