Full Product Manual

24
Click for contents
Alarm: Deterrent
Each camera input on your DVR will be displayed as CH1, CH2, etc.
Setup: Click the button to change the default spotlight detection area. The
entire view of the camera is enabled, however you can select certain areas if
you wish (see page 25 - Spotlight Detection Setup).
Schedule: Click the button to change the default spotlight schedule (see
page 26 - Spotlight Trigger Schedule).
Sensitivity: This option allows you to change how sensitive the spotlight will
be when your DVR has detected motion. This is independent of the cam-
era’s sensitivity for detecting motion. As an example, you may want to record
movement that is happening in the background but you don’t want the spot-
light and or the siren to be triggered until one or more objects gets closer to
the camera. For this scenario, you would adjust the sensitivity to 1 or 2. Some
experimentation is recommended to select the best settings.
Light Enable: Click the checkbox to enable the camera’s spotlight.
Light Duration: Lets you change the length of time the spotlight will remain
lit when motion has been detected. Adjust accordingly.
As the cameras included with your DVR don’t have a built-in siren, the Siren
Enable and Siren Duration functions are disabled.