Full Product Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode
- Live View Icons & Controls
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Enabling a Privacy Mask
- Record: Mainstream
- Record: Substream
- Alarm: Detection
- Alarm: Detection - Actions
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Alarm: Deterrent
- Spotlight Detection Setup
- Spotlight Trigger Schedule
- Device: PTZ
- Recording Configuration
- Record: Record
- Alarm: Detection
- Capture: Capture
- Capture: Schedule
- System Configuration
- Display: Display Configuration
- Network: Network
- Network: Email Configuration
- Network: Email Schedule
- Network: DDNS
- Network: IP Filter
- Network: Date and Time
- Device: HDD
- Device: S.M.A.R.T
- Device: Cloud Storage
- System: General
- System: Users
- Advanced: Maintain
- Advanced: Events
- Advanced: Auto Upgrade
- System Status
- System: Info
- System: Channel Information
- System: Record Info
- System: Network State
- Glossary
- Warranty Information
41
Click for contents
Network: Date and Time
Date and Time
If the date, time and time zone are incorrect, click the relevant dialogue boxes
and drop down menus to change.
NTP Settings
The NTP (Network Time Protocol) function gives your DVR the ability to au-
tomatically sync its clock with a time server. This ensures that the date and
time are always accurate (your DVR will periodically sync time automatically).
1. Click the “Update Now” button to automatically synchronize your DVR’s
internal clock with the time server instantly.
2. A message will appear on-screen stating that the time has been success-
fully updated. Click “OK” to continue.
DST Settings
Enable DST: If Daylight Saving applies to your time zone or region, click the
drop down menu to enable.
Time Offset: Select the amount of time that Daylight Saving has increased by
in your time zone. This refers to the difference in minutes, between Coordi-
nated Universal Time (UTC) and the local time.
DST Mode: You can select how Daylight Saving starts and ends:
Week: Select the month, a particular day and time when Daylight Saving
starts and ends. For example, 2 a.m. on the first Sunday of a particular month.
Date: Select the start date (click the calendar icon), end date and time when
Daylight Saving starts and ends.
→ Click “Default” to revert to default settings.
→ Click “Apply” to save settings.